Zum Hauptinhalt wechseln

Herausgegeben am 25. September 2015. Model A1687/A1634. Die Reparatur des 6s Plus gestaltet sich ähnlich zu denen früherer Generationen; benötigt werden Schraubenzieher und Hebelwerkzeuge. Verfügbar mit GSM oder CDMA / 16, 64 oder 128 GB / Silber, Gold, Space Grau oder Roségold.

1041 Fragen Alle anzeigen

iPhone 6s plus backlight half display

So i have 6s plus and i change broken display and battery,al always i disconecr battery first and then all other and first connect new display then battery all works great but i got darker left side on screen why? I try few times reconnect connectors and clean with alcohol but no luck…on orginal display was right site now i change display and now is the left site haha why? Pls help se image

Block Image

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 1
Einen Kommentar hinzufügen

3 Antworten

Gewählte Lösung

This is a backlight problem on the logic board. The 6s plus has two backlight driver IC’s One of them has failed causing the problem you are having.

You will need to replace the faulty IC by a reputable repairer.

War diese Antwort hilfreich?

Bewertung 4

5 Kommentare:

As for the backlight issue switching sides, different screen makers/refurbishers may apply different backlights which may have the connections reversed.

von

@refectio I didn’t think of that Minho. So this could be another faulty component on the backlight circuit. Like filter of diode? You learn something every day.

von

Thanks,but what now? Is diode?filter? Do i need to change this or what? I will go today to test one display to my local shop and will give and update if its the screen or like you say myb filter or diode...

And where are those located on motherboard? Thanks

von

I was in my local shop and they try screen on his screen is also on left site black,on my screen is also left site and on my ORGINAL screen is right site...how?why? What now?

von

One of the two backlight circuits, as Chris has already mentioned, is damaged. That's why the screen is dark on one side but not the other. It could be a diode, filter or IC (or all of them, each case is different). This is a very common issue on the 6S series and is usually caused by connecting a screen while the battery is still connected to the logic board. This can only be repaired via microsoldering and is not a DIY repair.

As for the darkness occurring on different sides, this is strictly related to the screen and is not something of concern. A replacement screen is a multi-layer sandwich, one of the layers being the actual backlight. Different backlight manufacturers use different configurations, for example the left side being controlled by driver 1 or driver 2. It makes no difference when both backlight drivers are working properly.

von

Einen Kommentar hinzufügen

If it happened with two displays then most likely it’s a board issue. But I’m confused as to why it switched sides…

War diese Antwort hilfreich?

Bewertung 1

2 Kommentare:

Yes i am also confused,on orginal was right sad darker but now when i change it it is left side but as you cen see is not the hole left side

von

What can be? Diode? Backlight filter? Or what?

von

Einen Kommentar hinzufügen

The backlight is working so I don’t think it is a board issue, because all of the LEDs in the matrix would be off if that were the case. Are you able to test your new display assembly on a different iPhone 6S?

War diese Antwort hilfreich?

Bewertung 0

3 Kommentare:

Tommorow i will go to check it,but orginal display also was the same problem but on the right side...

von

The touch working,camera and everything...

von

The digitizer and front-facing camera flex are two separate components, so it makes sense that they may still function fine.

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Mateus wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 10

Insgesamt: 925