Einstellungen

Is soldering required to replace just the digitizer?

I have a 2nd gen iPad Pro 12.9” and about a month after I bought it, it got dropped and cracked the digitizer. I finally found a decently-priced replacement and was looking at repair videos. To my alarm, it looks like the repair involves microsoldering. Is this the case? Is it literally easier (but ridiculously more expensive) to buy the full LCD assembly with the daughtercard and replace that instead?

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein

Bewertung 0

Einen Kommentar hinzufügen

Veröffentlicht: 18. Mär 2021

Einstellungen

Not only it requires soldering but plenty of other tools as well since the digitizer is glued to the display. Display - glue - digitizer - glue - glass. Older iPads had it separate making the replacement a lot easier. The part you need to desolder has chips on it which I believe are married to the motherboard. No matter what screen or digitizer you get you’ll need to desolder it and solder it onto the new assembly.

War diese Antwort hilfreich?

Ja Nein

Bewertung 0

Einen Kommentar hinzufügen

iPad Pro 12,9" (2. Generation)

Is soldering required to replace just the digitizer?

1 Antwort

Antwort hinzufügen

iPad Pro 12,9" (2. Generation)

Is soldering required to replace *just* the digitizer?

1 Antwort

Antwort hinzufügen

Is soldering required to replace just the digitizer?