Schematics for the tristar area - Anyone can help?

Question

iPad Pro 10.5" Reparatur

145 Fragen Alle anzeigen

Adrian @papaulm

Rep: 345

adrian büsselmann

16

2

1

Veröffentlicht: 25. Apr 2021

Einstellungen

Schematics for the tristar area - Anyone can help?

I've got this iPad with a charging problem and I think it isn't the tristar itself. According to the “Diode Mode Mesurements”. from the wiki page, I figured out that there is only an open line from the charging port. Or has this line something to do with the battery itself? Without any schematics or boardview I can’t get any further. Before changing the tristar itself I want to be shure that nothing else is faulty. Any help will be highly appreciated!

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein

Bewertung 0

2 Kommentare

Swap your probes around and measure. “Black probe on ground”

25. Apr 2021 von Chris Stables

@imicrosoldering Thank you for your reply! What readings should I get there? Or should I mesure the volts when plugged in?

26. Apr 2021 von Adrian

Einen Kommentar hinzufügen

1 Antwort

Gewählte Lösung

daniel @tech_ni

Rep: 34,6 Tsd.

10

22

44

Veröffentlicht: 26. Apr 2021

Einstellungen

here’s a boardview of the components that pad is connected too.

War diese Antwort hilfreich?

Ja Nein

Bewertung 2

7 Kommentare:

@tech_ni thank you for your help, so it might be the tristar at all. Will order a new one and see what happens then ...

26. Apr 2021 von Adrian

@tech_ni ... so I did change the tristar, still no charging or more than 0,05 A taking. Is there anything that might help me figuring out what is wrong with this iPad? Do you eventually know where to inject voltage to find the fault with my thermal camera?

3. Mai 2021 von Adrian

Have you checked for loose coils, only thing I could recommend is an icc pro tristar tester or a jc tester.

3. Mai 2021 von daniel

@tech_ni Did check all the coils as they where often loose I found out. A tester is a good idea, unfortunatly at the moment too expensive for me to buy one. I was hoping to find the problem manually ;-)

12. Mai 2021 von Adrian

Zxw isn’t very good at showing what the rails are in iPads and newer phones unfortunately.

15. Mai 2021 von daniel

2 weitere Kommentare anzeigen

Einen Kommentar hinzufügen

Swap your probes around and measure. “Black probe on ground” — Chris Stables
@imicrosoldering Thank you for your reply! What readings should I get there? Or should I mesure the volts when plugged in? — Adrian
@tech_ni thank you for your help, so it might be the tristar at all. Will order a new one and see what happens then ... — Adrian
@tech_ni ... so I did change the tristar, still no charging or more than 0,05 A taking. Is there anything that might help me figuring out what is wrong with this iPad? Do you eventually know where to inject voltage to find the fault with my thermal camera? — Adrian
Have you checked for loose coils, only thing I could recommend is an icc pro tristar tester or a jc tester. — daniel
@tech_ni Did check all the coils as they where often loose I found out. A tester is a good idea, unfortunatly at the moment too expensive for me to buy one. I was hoping to find the problem manually ;-) — Adrian
Zxw isn’t very good at showing what the rails are in iPads and newer phones unfortunately. — daniel

iPad Pro 10.5" Reparatur

Schematics for the tristar area - Anyone can help?

1 Antwort

Antwort hinzufügen