Repariere deine Sachen Community Store

Mid 2010 Modell A1278 / 2,4 oder 2,66 GHz Core 2 Duo Prozessor

794 Fragen Alle anzeigen

Einstellungen

Why is my screen slipping?

Hello. I bought a 2010 MBP 13” which I have upgraded and cleaned but the screen falls backwards after a certain point and also drops on closing after a certain point. It’s just a niggle and there is no wobble or give at all in the screen. If I thought it was just a case of tightening the screws on the clutch hinge assemblies I might do it, but I’d like to be sure before I go to the bother of dismantling the screen. Any opinions? Thanks.

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 0
Einen Kommentar hinzufügen

1 Antwort

Filtern nach:
Am hilfreichsten Neueste Älteste

Einstellungen

The display hinges have clutches in them which over time do wear out. Best to find a good independent Mac repair person as replacing them is a bit tricky!

You need to take the display fully off to gain access to the lid hinges MacBook Pro (13 Zoll, Mitte 2010, Unibody) Display tauschen

War diese Antwort hilfreich?

Ja Nein
Bewertung 0

4 Kommentare:

But do-able by myself as I have all the iFixit toolkit?

von

The screws are often well sealed so you need a bit of strength to not only turn but to press down so the screw driver doesn't slip. Make sure you have the correct tools as any errors could be dangerous!

von

thanks. I will order the hinges. I can't find them France but have used your link to The Book Yard. Just found them here!

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Pam Dooner wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 2

Insgesamt: 53