Zum Hauptinhalt wechseln

Zweite iPhone Generation. Modell A1241 mit 8 oder 16 GB Kapazität und schwarzer oder weißer Kunststoff-Rückseite. Die Reparatur ist leichter zu bewerkstelligen als beim iPhone 1. Es werden Schraubendreher, Hebelwerkzeuge und Saugnäpfe benötigt.

1158 Fragen Alle anzeigen

The phone doesn't change status as soon is connected to a charger

This iPhone dropped in water.

It still works but did not get the charge (but it can connect to other device)

I changed the battery (I thought it was short circuited)

After the change the problem was not solved and it even cannot connect to other devices

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung -1
Einen Kommentar hinzufügen

1 Antwort

Hilfreichste Antwort

The dock assembly is likely bad and needs to be cleaned or replaced. You may also have corrosion that needs to be cleaned with isopropyl (>90%).

These are the two likely solutions, however, if corrosion is real bad the resistors by the dock connection could have been fried (less likely).

Hope this helps.

War diese Antwort hilfreich?

Bewertung 2
Einen Kommentar hinzufügen

Antwort hinzufügen

fratini wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 221