Zum Hauptinhalt wechseln

Reparatur und Unterstützung für den zur PS3 gehörenden Kontroller. Er kam 2008 heraus, besitzt einen Lithium-Ionen Akku und eine Sechsachsensteuerung. Der Kontroller (CECHZC2) ist leicht zu reparieren.

157 Fragen Alle anzeigen

Why doesn't my PS3 Controller Pair?

I had my PS3 controller disassembled so I could clean it. Once I had it cleaned and reassembled, I went to power it on and I could not get it to power on with the Sony button.


I powered it on by plugging it into my PS3. It turned on with four blinking lights, but after ~15 minutes it never paired with the PS3. I disassembled it and clicked the reset button and re-seated the battery, but these didn’t make a difference.

Any clue as to what may be causing the issue? This controller was working perfectly before I disassembled it.

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 0
1 Kommentar

Can you try rebooting your device?

von

Einen Kommentar hinzufügen

1 Antwort

Gewählte Lösung

The ribbon connector that connects the button membrane to the motherboard wasn't making contact on my controller. There is actually a little rectangle of black padding that goes between the white plastic shell and the ribbon cable. There is even a groove in the plastic that the pad fits perfectly into. It had fallen out and I didn't know where it went. But as soon as I placed it back in, the controller powered back on and turned my console on.

War diese Antwort hilfreich?

Bewertung 0
Einen Kommentar hinzufügen

Antwort hinzufügen

Jesus Garcia wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 2

Letzte 30 Tage: 4

Insgesamt: 70