Zum Hauptinhalt wechseln

CDMA Version des iPhones der vierten Generation. Die Reparatur ist unkompliziert, aber Frontglas und LCD müssen gemeinsam ersetzt werden. Modell A1349 mit 16 oder 32 GB, CDMA Kompabilität.

295 Fragen Alle anzeigen

Why wont my phone turn on after replacing the front display?

I replaced the front display and went to turn the phone back on, but it wont turn on. So I plugged it into my computer to charge and see if anything happens. Immediately upon plugging in, the apple symbol appears on the display, but then goes away and the phone still wont turn on. What could it be?

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung -1
Einen Kommentar hinzufügen

1 Antwort

Gewählte Lösung

Sounds like either the battery is disconnected for some reason or your power/lock button is disconnected. Recheck all your connections and make sure none of the pins or connectors are damaged or dirty.

War diese Antwort hilfreich?

Bewertung 0

3 Kommentare:

I just plugged it into the wall outlet, and it turned on but a warning came up saying it needs to be restored in iTunes. But that cant happen because it wont turn on or connect to iTunes when it is connected via the computer cord.

von

Turns out my batter connector was not fully connected. the underneath screw wasn't tight enough, so that wasn't allowing the third battery prong to get good contact.

von

Happens to the best of us, glad you were able to find it quickly! :)

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Havner18 wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 1,109