Repariere deine Sachen Community Store

Veröffentlicht im März 2016. Modell: SM-G930V.

426 Fragen Alle anzeigen

Einstellungen

Can't remove back back cover, adhesive too strong.

I have a Samsung Galaxy S7 and a iOpener and am unable to get the back glass off of it, I am heating the iOpener in the microwave for a minute and put it on the left side of the back glass for 3 minutes. After that I use the suction cup that came with the iOpener on the left side without touching the rounded edges. I am unable to get it open at all, not even so much that i can get something thin inside to pry it open.

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 0
Einen Kommentar hinzufügen

1 Antwort

Filtern nach:
Am hilfreichsten Neueste Älteste
Gewählte Lösung

Einstellungen

That microwave thing is a joke if I'm honest.

If you haven't got a heat plate, use a hair dryer.

Biggest friend removing the back glass, or any glued glass on a device, is a drop of isopropyl. Softens the adhesive up lovely paired with heat.

Just a couple of drops now and then, it'll evaporate out, but too much, can cause other issues.

War diese Antwort hilfreich?

Ja Nein
Bewertung 3

2 Kommentare:

I will try a heat plate with a drop of isopropyl, gonna get back to you to see if that helped (hopefully) tomorrow!

von

Best of luck.

It's a sped up video of one of my repairs, but similar process.

You'll need a bit more heat with the sucker pulling up initially, as the glass is sunk in. When you start, don't go too fast, nice and gentle.

https://youtu.be/GvS1mI-aHQ4

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Henrik Müller wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 4

Letzte 30 Tage: 25

Insgesamt: 678