Zum Hauptinhalt wechseln

iMac Intel 27" EMC 2309 (Ende 2009, Core 2 Duo 3.06 oder 3.33 GHz) ID iMac10,1, EMC 2374 (Ende 2009, Core i5 2.66 GHz oder Core i7 2.8 GHz) ID iMac11,1

467 Fragen Alle anzeigen

Where to place optical fan sensor on an SSD/Optibay adapter.

My optical fan rpm's are going over 2500 since I installed an SSD in the dvd superdrive slot. I got the adapter from ifixit, but not sure where to put the sensor. Right now, i've got it in roughly the same area it was with the dvd drive, but I think it's running way too hot/fast. Any ideas to get that fan to calm down??

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung -1
Einen Kommentar hinzufügen

1 Antwort

Gewählte Lösung

Here's an installation of a SSD in a iMac. Note the placement of the temperature sensors.

http://www.thatsiebguy.com/2009/10/iMac-...

If this does not fix the problems then we need to look at fans control resets

War diese Antwort hilfreich?

Bewertung 1

3 Kommentare:

An SSD drive should run much cooler than a standard drive as there are no moving parts.

von

Here's where to download a fan conrtol for the iMac: http://www.macupdate.com/info.php/id/230...

von

That installation is using an SSD to replace the main HDD. My installation replaces the DVD superdrive. Any knowledge where the coolest place on that side of the iMac is to place the sensor?

von

Einen Kommentar hinzufügen

Antwort hinzufügen

hellohogo wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 3,437