Zum Hauptinhalt wechseln

Modell A1502 / 2,6 GHz (Turbo Boost bis zu 3,1 GHz) oder 2,8 GHz (Turbo Boost bis zu 3,3 GHz) Dual-Core Intel Core i7 Prozessor mit 4MB geteiltem L3 Cache.

494 Fragen Alle anzeigen

mac won't turn on or charge

hey,

I have change my battery six month ago with a iFixit kit. Everything was going well.

I am in holiday in the Caribbean, when I plugged the charger the first time (It was running out of battery), I had a very short (0,2s) green light on the Magsafe, then it stopped.

And since my mac won't charge at all (no light), I tried the different NVRAM and SMC, with an other Magsafe charger (a friend have exactly the same mac and doesn't have any problem...) - nothing.

I really don't know what to do now. Asking myself if it's a short-circuit that damaged the battery cause of the voltage difference ? Or just that my mac died on me randomly. Am pretty desperate right now because I have all my work on it.

Please, help me :)

Thanks in advance for your advise !

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 0
2 Kommentare

So the MagSafe LED just goes out? Or did it go Amber.

von

It lit just once very shortly, then nothing since !

von

Einen Kommentar hinzufügen

2 Antworten

Hilfreichste Antwort

@jeanlecerf Unfortunately, you most likely have a bad battery (even iFixit isn’t immune to manufacturing defects). There is a known issue with the chips on the batteries board, that either needs replacing (NOT a DIY job) or a replacement battery. I had the exact same issue with a battery for a 2013 MB Air (not purchased from iFixit).

Get in contact with iFixit support about the problem. They’ll take excellent care of you :)

War diese Antwort hilfreich?

Bewertung 2

3 Kommentare:

Thanks for your answer ! How did you do then with your MB ? Changed the battery?

von

@jeanlecerf I luckily hadn’t recycled the original battery, which was still OK-ish, so I put that back and everything was A-OK again. The supplier was out of stock on the battery, so I’m still waiting for the replacement.

von

Thanks you very much. I still also have my original one. I'll try when am back home. Fingers crossed !

von

Einen Kommentar hinzufügen

Try disconnecting the battery from the logic board and MagSafe. Press and hold the Power Button for 15 seconds. Reconnect the battery, the the MagSafe, you should get a spontaneous restart.

War diese Antwort hilfreich?

Bewertung 2

1 Kommentar:

Thanks. But just tried and nothing new...

von

Einen Kommentar hinzufügen

Antwort hinzufügen

jeannotparis wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 1

Insgesamt: 105