Repariere deine Sachen Community Store

Vierte iPhone Generation. Die Reparatur an sich ist unkompliziert, aber Frontglas und LCD müssen gemeinsam ersetzt werden. GSM mit 8, 16 oder 32 GB Kapazität, Modell A1332 in schwarz und weiß.

2375 Fragen Alle anzeigen

Einstellungen

How can I remove a stripped screw?

Hello, my girlfriend bought the back plate from a different site to make her iphone pink. She got it today and when she went to take off the one that was on hers I get a text that the screws are totally stripped. She went to the Apple store and they said it was to far gone to do anything with. I am going to be getting my shot at the screws in a few days, so any advice would be appreciated. Thank you

Roger

Beantwortet! Antwort anzeigen Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung -1
Einen Kommentar hinzufügen

3 Antworten

Filtern nach:
Am hilfreichsten Neueste Älteste
Gewählte Lösung

Einstellungen

Try one of these. You'll find other possible answers by clicking the tag to the right.

If this Answer is helpful please remember to return and mark it Accepted.

Precision Screw Extractor Set Bild

Produkt

Precision Screw Extractor Set

$24.99

War diese Antwort hilfreich?

Ja Nein
Bewertung 0
Einen Kommentar hinzufügen

Einstellungen

Try super glue on the end of your screw driver, it might work

War diese Antwort hilfreich?

Ja Nein
Bewertung 0

1 Kommentar:

Only if the head isn't stripped completely smooth. If all you have is a neat little hole in the head, you'll have to use one of the other solutions mentioned.

von

Einen Kommentar hinzufügen

Einstellungen

You can try this but i must warn you to be VERY CAUTIOUS in what you are doing. I used this method and it was successful for me, but then again, it was a small screw. *I am not responsible for any damage done to your phone* :)

Ok, so i took a power drill and used it on the top screw of the EMF protection shield. The screw was stripped so I took the smallest drill bit i could find that would just fit the circumference of the screw. Then, very carefully screw into it, completely making the screw into a bowl. Next, switched directions of the drill, used a little force and went slow....next thing i know the screw is out. You can try this but just be careful and don't break anything. GOOD LUCK! Let me Know if you need anything else.

War diese Antwort hilfreich?

Ja Nein
Bewertung 0
Einen Kommentar hinzufügen

Antwort hinzufügen

Roger Doherty wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 4,763