Repariere deine Sachen Community Store

Modellnummer A1707. Veröffentlicht im Juni 2017, erschien dieses MacBook Pro mit Kaby Lake Prozessoren mit bis zu 2,9 GHz quad-core Intel Core i7 Prozessoren, mit Turbo Boost bis zu 3,9 GHz.

327 Fragen Alle anzeigen

Einstellungen

My battery still doesn't charge after replacement

Hi,

Recently, my MacBook battery suddenly ceased to charge. I decided to carefully replace the battery.

Initially, my MacBook booted correctly after the battery replacement. However, to my dismay, the following day, the "no charging" problem resurfaced. I am unable to power on my battery (no signs).

Feeling utterly powerless, I'm uncertain about the next steps. Could the problem lie deeper, perhaps within the motherboard?

I appreciate any advice you can offer.

PS 1: Unfortunately, my Mac is unable to boot, preventing me from performing an SMC reset.

PS 2: I've already attempted to use different USB-C ports to troubleshoot the issue.

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 0
Einen Kommentar hinzufügen

2 Antworten

Filtern nach:
Am hilfreichsten Neueste Älteste

Einstellungen

Sadly your logic board needs repairs, the Texas Instruments SN650839 Power Management chip needs to be replaced. You can see it in Step 9in the MacBook Pro (15 Zoll, Ende 2016, Touch Bar) Teardown which is the same for the 2017 model as well.

War diese Antwort hilfreich?

Ja Nein
Bewertung 0

2 Kommentare:

Thanks for responding. Are you sure that we should replace this chip? I searched for information on it but found almost nothing.

von

@kisac19781 - If you review the schematics and board view drawings testing the power rails voltages you’ll see this often fails.

von

Einen Kommentar hinzufügen

Einstellungen

@kisac19781 you can find it by using the given number, but it's a pain. Use the actual IC description. It is 7X7MM BGA 168 P650839A0B IC. Make sure that you check everything in your PBUS Supply & Battery Charger circuit before replacing one of the most complicated parts :-)

What voltage do you have coming into the board. What does your USB ammeter show? Have you checked PPDCIN_G3H_CHGR? what voltage do you get on there? What voltage do you have on R6921?

There are so many things you should check out before just willy nilly replacing a BGA168 IC. Not saying it isn't but there is no way I would do it without checking the board first.

Block Image

Block Image

War diese Antwort hilfreich?

Ja Nein
Bewertung 0
Einen Kommentar hinzufügen

Antwort hinzufügen

Timmy wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 3

Letzte 7 Tage: 11

Letzte 30 Tage: 65

Insgesamt: 65