Repariere deine Sachen Community Shop
Gemeinsam reparieren - Jetzt registrieren

Reparaturanleitungen, Demontage und Informationen zur Fehlerdiagnose für den Sony PlayStation 5 DualSense-Controller der ersten Generation, Nachfolger der DualShock-Serie. Identifiziert durch die Modellnummer CFI-ZCT1W und das Motherboard-Modell BDM-010.

20 Fragen Alle anzeigen | 8 Ersatzteile Store

Einstellungen

Orange light rapidly blinking non stop after fully charged

I can't identify what is causing this. I already tested in my PC with a software to check all buttons in my dualsense while plugged in and it works perfectly fine, but once I disconnect and try wireless connection, it shuts down, also when the controller is off, the battery is fully charged and it is plugged in, instead of just stop charging, it keeps flashing rapidly(not pulsating) the orange light. There is no issue with the battery, the only thing that was happening was stick drift and I sprayed some isopropyl alcohol into the stick. Does anyone had the same issue? Oh and the reset button doesn't seem to work either

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 0
Einen Kommentar hinzufügen

3 Antworten

Filtern nach:
Am hilfreichsten Neueste Älteste

Einstellungen

Hi Rafael!

It's either the battery or something on the motherboard which shorted.

I would try to replace the battery first anyway, just to be like 100% sure.

If that didn't worked, then check the motherboard to see if it still looks OK.

Did you disassembled the device first before you used isopropyl alcohol? If not, then most likely something on the motherboard did short. As the battery was still connected.

War diese Antwort hilfreich?

Ja Nein
Bewertung 0
Einen Kommentar hinzufügen

Einstellungen

Completing the @dan0 esponse, the ribbon cables can be a reason, they are so much sensitive and breaks very easy, ocasionally making a short.

To validate this case, remove the ribbon cables connected in the motherboard, connect your battery and after, connect the board with the usb in computer, this should turn on the controller (with usb connection the controller is always on) in case these cables are the problem.

War diese Antwort hilfreich?

Ja Nein
Bewertung 0
Einen Kommentar hinzufügen

Einstellungen

Hello. Was you able to find the reason of problem? After changing analog sticks to new with Hall effect I have same behavior. Probably I messed up somewhere during soldering. Now I don't know how to fix it.

War diese Antwort hilfreich?

Ja Nein
Bewertung 0

1 Kommentar:

Post a photo of the motherboar here, so anyone can help you better.

Clean all the motherboard whit alcohol, this can help if you dont see any visible short

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Rafael wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 1

Letzte 7 Tage: 14

Letzte 30 Tage: 60

Insgesamt: 630