Nespresso Inissia Leak from pushfit connector from pump

My krups nespresso inissia is leaking from the bottom. I heard the push fit connecing the pump to the tubing pop out. I found a tiny O ring when I disassembled the machine. I cannot see where this goes as there is already an O ring on the male pump connector. I pushed it back in (leaving the O ring out) and all was well for about 4 coffees and then the connector popped out again and water pumped out the bottom again. Could someone advise on this? Thanks. Please see photos

Block Image
Block Image
Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Bewertung 0
Einen Kommentar hinzufügen