Rep: 11
1
There are four metal tabs that resemble screws that stick out on the sides of the drive. I am unable to insert the drive into the enclosure you sold me. I know I have the correct model of my MacBook Pro but the drive clearly doesn't fit. Can these tabs be removed in order to fit the enclosure or do I need to get a different one?
See the tabs circled in red.
Ist dies eine gute Frage?
Rep: 499,2 Tsd.
35
341
976
Ok, got it! These are the mounting pins (threaded screw) that the bracket holds the drive in place which you can see in Step 7 in this guide and the other side slides into the holes provided.
Then jump to Step 11 which points to the four mounting pins in this guide MacBook Pro (15 Zoll, Mitte 2010, Unibody) Festplatte austauschen you'll need a Torx T6 screwdriver to remove them.
War diese Antwort hilfreich?
Got them out, and it works! Thank you!
@christophe38981 - If you're good, please accept the answer, thanks!
Letzte 24 Stunden: 0
Letzte 7 Tage: 3
Letzte 30 Tage: 8
Insgesamt: 91
3 Kommentare
Can you post a few pics so we can see what you are facing,
von DanJ
See the tabs circled in red.
von Christopher J
@danj I think the photo is attached, I'm not sure how to get it to post though.
von Christopher J