Repariere deine Sachen Community Shop
Gemeinsam reparieren - Jetzt registrieren

Reparaturanleitungen, Support und Problemlösungen für das 2022er 13-Zoll MacBook Air, ausgestattet mit Apples M2 Chip. Erscheinungsdatum 15. Juli 2022, Modellnummer A2681

20 Fragen Alle anzeigen | 21 Ersatzteile Store

Einstellungen

Sleep-wakes works, but black screen on restart (Air 2022 A2681)

I recently replaced the display panels on 2x A2681 M2 Air. Everything is working perfectly, except for one issue: after a shutdown or restart, the screen remains black until I close and reopen the lid. Interestingly, the display works fine when waking from sleep—this issue only occurs after a full shutdown or reboot. Has anyone else run into this? I've searched extensively but haven’t found a solution.

Diese Frage beantworten Ich habe das gleiche Problem

Ist dies eine gute Frage?

Ja Nein
Bewertung 0
Einen Kommentar hinzufügen

1 Antwort

Filtern nach:
Am hilfreichsten Neueste Älteste

Einstellungen

The angle sensor is not correctly set. Did you transfer the sensor if you transferred the display from a different system. If you got the part from Apple you need to run the Calibration tool which they gave you access to via their paywall (part of parts cost)

Reference Step 24~28 in this guide MacBook Air 2022 (M2) Display tauschen

War diese Antwort hilfreich?

Ja Nein
Bewertung 0

2 Kommentare:

The angle sensor is original to the same MacBook. It was only removed from the hinge using a 1IP Torx Plus driver, while remaining otherwise connected. I'll try to redoing it. Thanks

von

@larka10483 - The magnetic flux from the magnet held within the replacement display interaction with the strip of hall sensors within the systems Angle Sensor is not correctly aligned. A common issue when replacing the display in this series.

von

Einen Kommentar hinzufügen

Antwort hinzufügen

Larka wird auf ewig dankbar sein.
Seitenaufrufe:

Letzte 24 Stunden: 0

Letzte 7 Tage: 5

Letzte 30 Tage: 19

Insgesamt: 221