I recently cracked my 3gs screen and ordered the replacement kit and changed it. After replacement (in the upright position) the letter "P" does not work. If i turn it sideways it works. Almost like the edge of the screen doesn't work. Is there a calibration for this? I have dissassembled and reassembled and checked connectors, which appear ok. Thanks in advance.
Ist dies eine gute Frage?
Rep: 1 Tsd.
4
1
Check your digitizer cable connection. It sounds like you have a loose or bad digitizer connection. If not, it could be a faulty digitizer and you may need to get your screen replaced.
Again, check your connection to make sure it is making good contact with the mainboard connector.
Best of Luck,
War diese Antwort hilfreich?
Letzte 24 Stunden: 0
Letzte 7 Tage: 0
Letzte 30 Tage: 0
Insgesamt: 388
