I have recently broken my controller through a series of unfortunate drops on the floor. The select button is caved in and the plastic connector that holds the LB and RB button on its bracket has snapped on the RB side.
Which glue do I use to bond it together?
Ist dies eine gute Frage?
Rep: 55
3
For small plastic repairs, I have always used two brands.
both of these are a two part system, powder and glue/activator. put some glue, then some powder, then more glue. it will instantly cure. you can then carefully sand down any excess.
be sure to do so in a properly ventilated area and read the instructions for the glue to avoid any health hazards. The fumes can be strong.
War diese Antwort hilfreich?
Buying QBond immediately. Will come back once I've made the repairs.
Sweet! Let me know how it does!
The Q Bond worked perfectly, thank you. But now I have to sand off the bits of glove that got stuck on while applying
Letzte 24 Stunden: 0
Letzte 7 Tage: 0
Letzte 30 Tage: 5
Insgesamt: 58
