Zum Hauptinhalt wechseln

CDMA Version des iPhones der vierten Generation. Die Reparatur ist unkompliziert, aber Frontglas und LCD müssen gemeinsam ersetzt werden. Modell A1349 mit 16 oder 32 GB, CDMA Kompabilität.

424 Fragen Alle anzeigen

Are pentalobe screws still good after removed?

i was replacing the back of my iPhone to make it red, i put the new back in and tried to put back my pentalobe screws but they wouldn't go back, is this supposed to happen, do i need to buy Phillips screws instead??

Beantwortet! View the answer Ich habe das gleiche Problem

Ist dies eine gute Frage?

Punktzahl 0
Einen Kommentar hinzufügen

MacBook Akku Fix Kits

Ab $69.99

Buy Now

MacBook Akku Fix Kits

Ab $69.99

Buy Now

2 Antworten

Gewählte Lösung

Yes, just like any other screw, as long as the correct bit is used to remove it, it will go back in just fine. Did you use a proper pentalobe screwdriver, or something else as a stand-in? Our iPhone liberation kit uses a standard star bit to remove the pentalobe screws, which strips them, which is why we then include Phillips screws to replace them.

P2 Pentalobe Screwdriver iPhone Bild

Produkt

P2 Pentalobe Screwdriver iPhone

$8,99

iPhone 4/4S Liberation Kit Bild

Produkt

iPhone 4/4S Liberation Kit

$9,99

War diese Antwort hilfreich?

Punktzahl 1

Kommentare:

I ordered a new backing, it was sent with two screwdriversmid didnt know which was which and i think i used the wrong one

von

Einen Kommentar hinzufügen
Hilfreichste Antwort

Check if the new back cover is seated properly. Screw should go back in provided that its head is not damaged when you removed it. Use the correct screw driver to remove screws.

War diese Antwort hilfreich?

Punktzahl 1
Einen Kommentar hinzufügen

Antwort hinzufügen

Ryan Martins wird auf ewig dankbar sein.
Statistik anzeigen:

Letzte 24 Stunden: 0

Letzte 7 Tage: 0

Letzte 30 Tage: 0

Insgesamt: 2,890