Rep: 1
1
1
So I got this iphone with a defect the home button was melted, so i ordered tools and a replacement. When i was almost done (corner screws) i figured i had a big problem because my headphone jack was in the way so i couldn't get to the screw no matter how i tried. it might be the screw diver im using i think its to big.
Ist dies eine gute Frage?
Rep: 117,2 Tsd.
84
59
524
Hey Noahstanwix,
It would help us to see what screw you are talking about. If you could include an image, we might be able to help you out even more. However, we performed all of our repairs and guides for this device using our 54 Bit Driver Kit. I'm not sure exactly what driver you are using, but the 54 Bit Kit has worked great for us!
Hope this helps! Good luck!
War diese Antwort hilfreich?
the problem is its tilted so it wont go in all the way
and i cant put ia picture or i would cause this is my phone/camera
Rep: 55
2
1
I've felt with this many times. U just have to get a tiny magnetized screw driver at a weird angle even pressing down a little on the jack. It's small and not in there real right. Sharp screw driver tilted and a little patience will get it!
War diese Antwort hilfreich?
Letzte 24 Stunden: 0
Letzte 7 Tage: 0
Letzte 30 Tage: 0
Insgesamt: 2,008
1 Kommentar
ok got one up click on the picture and look for the red circle
von noahstanwix