iFixit - Answers With Device "Food Processor"

Thermomix TM5: TM5 Leistungsplatine getauscht Waage dafür deaktiviert worden

Mon, 08 Dec 2025 08:16:14 -0700

Hallo die Leistungsplatine von meinen Thermomix war defekt, Thermomix ging nach paar Sekunden immer wieder aus.

Ich habe die Original Platine getauscht mit Original Ersatzteil von Vorwerk, allerdings ohne Waage Treiber.

Weiß jemand wie ich den Treiber einspielen kann das die Waage auch wieder funktioniert?

⟐ Commented Dezember 08, 2025 at 8:16 GMT-7

Thermomix TM5: Kurzschluss nach Flüssigkeit im Gerät, welche Teile austauschen?

Thu, 27 Nov 2025 09:17:51 -0700

Mein Sohn hat das Messer nicht korrekt verriegelt und Sauce gemacht. Es ist so viel Flüssigkeit ins Gerät gelangt, dass der FI ausgelöst hat.

Ich habe bereits alles auseinander genommen und gereinigt. Scheint also entweder eine interne Sicherung oder ein Defekt an der Platine zu sein.

Die Sicherung kann ich selbst tauschen, wenn ich einen Hinweis bekommen könnte wo sie verbaut ist.

Dankeschön!

⟐ Answered November 27, 2025 at 9:17 GMT-7

Thermomix TM5: Nach dem reinigen Wasser um Display

Thu, 03 Apr 2025 15:10:44 -0700

Nach einer zu feuchten reinigung habe ich nun Feuchtigkeit im Display. Soll ich warten, bis es verdustet ist (auf die Heizung stellen) oder muss ich das display austauschen.?

⟐ Answered April 03, 2025 at 15:10 GMT-7

Thermomix TM5: Messer blockiert, dreht sich nicht mehr.

Sat, 08 Mar 2025 20:22:28 -0700

Messer dreht sich nicht, blockiert.

⟐ Commented März 08, 2025 at 20:22 GMT-7

Thermomix TM5: Bei Verwendung des Chips hängt sich der TM5 auf

Mon, 06 Jan 2025 12:21:37 -0700

Bei Verwendung des Kochbuches hängt sich der TM5 auf und geht in einen dauer reboot. Kann man diesen Fehler selber beheben?

⟐ Answered Januar 06, 2025 at 12:21 GMT-7

Thermomix TM5: Impuls vom encoder defekt?

Thu, 01 Apr 2021 11:35:14 -0700

Beim Betätigen des AN/Aus Schalters geht der Thermomix an, Lass ich den Knopf los, geht der wieder aus.

Schalter ist schon erneuert, hat nichts geholfen.

Bitte um Hilfe

Thermomix TM5: Platine vom tm5 Display

Tue, 01 Oct 2019 06:03:09 -0700

Meine rückseitige Platine am Display meines TM5 Thermomix ist defekt.

Ich benötige die Platine als Ersatz und hätte eine gewusst wo ich diese bekommen kann.

Vielen Dank

Manfred

Food Processor: reassemble the drive shaft and washer stack

Sun, 09 Aug 2026 02:44:36 -0700

please provide guidance to fix the washer/locking-piece stack in the FDM78 kenwood multipro food processor bowl. It came out while i was washing today.

Black and Decker PowerPro II FP1510: I have black+decker blender model BL 1220 and it's not working what I.

Thu, 02 Jul 2026 18:25:05 -0700

I have black and decker blender model BL1220 it's not working for long time.

Thermomix TM5: Why the machine not working

Wed, 01 Jul 2026 00:09:24 -0700

How can you advance me to repair the machine showing the error c72

⟐ Commented Juli 01, 2026 at 0:09 GMT-7

Black and Decker PowerPro II FP1510: Food processor is not working

Fri, 08 May 2026 13:55:10 -0700

I got it as a gift but did not used it for over a year. Now when I want to use it, it does not work. Is there anything that I can look at, repair it myself, find out why it does not work?

Thanks

⟐ Commented Mai 08, 2026 at 13:55 GMT-7

Thermomix TM5: Should I self repair the TM5 scales?

Sun, 19 Apr 2026 05:55:05 -0700

The scales stopped working by just showing 0000 or max limit weight figures when pressing the lid down. A few days later the scales seem to have recovered its sensitiveness yet it appears to be too sensitive and readings show changes even when untouched.

Is it at all worth attempting to repair it or send it to be repaired?

⟐ Answered April 19, 2026 at 5:55 GMT-7

Thermomix TM5: Dial jumps when selecting speed temp etc

Sun, 29 Mar 2026 10:52:40 -0700

I have one of these, it is working fine Except for the dial. Selecting an adequate temperature or time is kind of a minigame. For one dial step sometimes goes back and forth, sometimes does the right thing or sometimes makes a big bump. I was bearing with it because it was just an annoyance, but has been three onions that I only wanted "chopped" and I ended with them utterly pulped because the dial decided it.

I guess I only need to clean contacts, but before try to tear it I was hopping if someone here has some experience, If it is an easy task or if does not worth it.

⟐ Answered März 29, 2026 at 10:52 GMT-7

Thermomix TM5: How can I fix error c208?

Fri, 27 Mar 2026 05:07:22 -0700

My wife closed the device without the bottom lid and after 3 seconds the device shot down, stuck bowl, making clicking noise and code c208 pop up. I dried the device, put it back in place, got out the bowl manually, and put it back into the place. Plugged in, but c208 shows all the time. Official troubleshooting guide says it’s locking mechanism: repair when the error continues to appear.

However there is no further instructions on how to repair it anywhere in the internet. Can someone help me ? Much appreciated.

⟐ Commented März 27, 2026 at 5:07 GMT-7

Thermomix TM5: My problem is C 32

Sat, 07 Feb 2026 12:33:07 -0700

My Problem is c32

Food Processor: Kenwood FP730 Food Processor has suddenly stopped working

Sat, 24 Jan 2026 06:54:05 -0700

my Kenwood FP730 Food Processor has suddenly stopped working. i have checked the obvious like the fuse in plug.

Does anyone know what might be the issue with this item.

Whilst it's not an expensive item it just seems a shame to throw it and all the accessories away if a simple part replacement might fix the issue.

Regards

Dave

Food Processor: How to open the cover and change the belt Food Processor190 Kenwood

Mon, 12 Jan 2026 04:20:38 -0700

I have fp190 krnwood which is good but the belt is defective and I want to change ,how can I open the cover and change the belt thanks

⟐ Answer accepted Januar 12, 2026 at 4:20 GMT-7

Braun multipractic: How to remove on/off switch Braun K600

Fri, 12 Dec 2025 18:01:10 -0700

Hello,

I have a Braun K600 Food Professor. It has an on/off knob. Through the centre of this knob is a pulse button.

The rubber membrane the prevents dirt going into the gap around the button has come off the knob. I am sure it will pop back on if I could take the knob off however, I can’t see how to do it. I’ve tried pulling it off, but it seems to firmly on for it to be a friction fit.

the button has come off the knob. I am sure it will pop back on if I could take the knob off however, I can’t see how to do it. I’ve tried pulling it off, but it seems to firmly on for it to be a friction fit.

I’m wondering if anyone is actually familiar with this knob and could advise me

⟐ Commented Dezember 12, 2025 at 18:01 GMT-7

Cuisinart DLC-8F: My motor works but the motor shaft stick broke off. How can I find ano

Sat, 06 Dec 2025 11:57:45 -0700

My motor works but the motor shaft stick broke off. I need another. Help!

⟐ Commented Dezember 06, 2025 at 11:57 GMT-7