iFixit - Answers With Device "Food Processor"

Thermomix TM5: Bei Verwendung des Chips hängt sich der TM5 auf

Mon, 06 Jan 2025 12:21:37 -0700

Bei Verwendung des Kochbuches hängt sich der TM5 auf und geht in einen dauer reboot. Kann man diesen Fehler selber beheben?

⟐ Answered Januar 06, 2025 at 12:21 GMT-7

Thermomix TM5: TM5 Leistungsplatine getauscht Waage dafür deaktiviert worden

Mon, 08 Dec 2025 08:16:14 -0700

Hallo die Leistungsplatine von meinen Thermomix war defekt, Thermomix ging nach paar Sekunden immer wieder aus.

Ich habe die Original Platine getauscht mit Original Ersatzteil von Vorwerk, allerdings ohne Waage Treiber.

Weiß jemand wie ich den Treiber einspielen kann das die Waage auch wieder funktioniert?

⟐ Commented Dezember 08, 2025 at 8:16 GMT-7

Thermomix TM5: Kurzschluss nach Flüssigkeit im Gerät, welche Teile austauschen?

Thu, 27 Nov 2025 09:17:51 -0700

Mein Sohn hat das Messer nicht korrekt verriegelt und Sauce gemacht. Es ist so viel Flüssigkeit ins Gerät gelangt, dass der FI ausgelöst hat.

Ich habe bereits alles auseinander genommen und gereinigt. Scheint also entweder eine interne Sicherung oder ein Defekt an der Platine zu sein.

Die Sicherung kann ich selbst tauschen, wenn ich einen Hinweis bekommen könnte wo sie verbaut ist.

Dankeschön!

⟐ Answered November 27, 2025 at 9:17 GMT-7

Thermomix TM5: Nach dem reinigen Wasser um Display

Thu, 03 Apr 2025 15:10:44 -0700

Nach einer zu feuchten reinigung habe ich nun Feuchtigkeit im Display. Soll ich warten, bis es verdustet ist (auf die Heizung stellen) oder muss ich das display austauschen.?

⟐ Answered April 03, 2025 at 15:10 GMT-7

Thermomix TM5: Messer blockiert, dreht sich nicht mehr.

Sat, 08 Mar 2025 20:22:28 -0700

Messer dreht sich nicht, blockiert.

⟐ Commented März 08, 2025 at 20:22 GMT-7

Thermomix TM5: Impuls vom encoder defekt?

Thu, 01 Apr 2021 11:35:14 -0700

Beim Betätigen des AN/Aus Schalters geht der Thermomix an, Lass ich den Knopf los, geht der wieder aus.

Schalter ist schon erneuert, hat nichts geholfen.

Bitte um Hilfe

Thermomix TM5: Platine vom tm5 Display

Tue, 01 Oct 2019 06:03:09 -0700

Meine rückseitige Platine am Display meines TM5 Thermomix ist defekt.

Ich benötige die Platine als Ersatz und hätte eine gewusst wo ich diese bekommen kann.

Vielen Dank

Manfred

Black and Decker PowerPro II FP1510: Food processor is not working

Sat, 15 Mar 2025 21:47:48 -0700

I got it as a gift but did not used it for over a year. Now when I want to use it, it does not work. Is there anything that I can look at, repair it myself, find out why it does not work?

Thanks

⟐ Commented März 15, 2025 at 21:47 GMT-7

Cuisinart Mini-Prep Plus DLC-2A: Why isn't my Mini-Prep Plus turning on?

Mon, 30 Sep 2024 15:34:52 -0700

The chopper is not responsive when the chop or grind buttons are pressed.

⟐ Commented September 30, 2024 at 15:34 GMT-7

Cuisinart DLC-8F: Motor post cover cracked

Sun, 14 Apr 2019 16:04:27 -0700

Can the motor post cover be replaced?

⟐ Commented April 14, 2019 at 16:04 GMT-7

Thermomix TM5: Should I self repair the TM5 scales?

Sun, 19 Apr 2026 05:55:05 -0700

The scales stopped working by just showing 0000 or max limit weight figures when pressing the lid down. A few days later the scales seem to have recovered its sensitiveness yet it appears to be too sensitive and readings show changes even when untouched.

Is it at all worth attempting to repair it or send it to be repaired?

⟐ Answered April 19, 2026 at 5:55 GMT-7

Thermomix TM5: How to reset the C150 error?

Wed, 06 Aug 2025 13:17:07 -0700

My TM5 shows a C150 error message and immediately shuts down. The problem is a stuck/broken lid sensor. After repairing the sensor the TM5 still shows the error so it must be stored somewhere in the device. How to reset this error store? There are some ebay crooks “selling” you the C150 reset for a hundred bucks so it must be able to be done somehow. Any ideas are appreciated. Just exercising my right to repair.

⟐ Commented August 06, 2025 at 13:17 GMT-7

Cuisinart DFP-14BCN: Why are my food processor’s blades not spinning?

Sat, 27 Apr 2024 10:19:23 -0700

The blades on my food processor don’t spin and it sounds like the motor is starting, but it doesn’t start or spin.

⟐ Answered April 27, 2024 at 10:19 GMT-7

Thermomix TM5: Thermomix TM 5 Error C142

Wed, 26 Nov 2025 22:06:40 -0700

Hello, my thermomix still shows error C142. After turning on and attempting to turn on the speed, you can hear the engine trying to move its arms and error C142 appears.

⟐ Commented November 26, 2025 at 22:06 GMT-7

Hamilton Beach 70730: Lid refuses to come off and when plugged in there is no sound

Sun, 15 Oct 2023 21:01:16 -0700

I got this as a gift 2 months ago. I set up the processor based on the instructions then plugged it in...the processor did not work at all.

Now I am trying to pull down the machine and the LID is stuck and will not move even though I have tried turning it both clockwise and anti-clockwise.

PLEASE HELP

⟐ Commented Oktober 15, 2023 at 21:01 GMT-7

Thermomix TM5: error c140 dispite the bowl being correctly installed

Fri, 19 May 2023 19:07:13 -0700

With the bowl correctly installed I get c140 error code when I try and start the blades spinning.

This problem is intermittent as one day it will work and another it won't and only time seems to fix it.

Thermomix TM5: How can I fix error c208?

Fri, 27 Mar 2026 05:07:22 -0700

My wife closed the device without the bottom lid and after 3 seconds the device shot down, stuck bowl, making clicking noise and code c208 pop up. I dried the device, put it back in place, got out the bowl manually, and put it back into the place. Plugged in, but c208 shows all the time. Official troubleshooting guide says it’s locking mechanism: repair when the error continues to appear.

However there is no further instructions on how to repair it anywhere in the internet. Can someone help me ? Much appreciated.

⟐ Commented März 27, 2026 at 5:07 GMT-7

Thermomix TM5: TM5 crashes when pressing UI

Sun, 12 Sep 2021 03:47:37 -0700

My TM5 shutdown during cooking, and after rebooting, when pressing Next at the initial warnings and disclaimers, it crashes again. I’ve disassembled and cleaned the main board with alcohol, and all the caps looked fine. After cleaning it looked ok for half an hour, but then it started doing this again. It seems that the reboot happens while it’s playing the clicking sound. Anyone has any clues of what the issue might be? It’s two and half years old…

I fixed it by reflowing the circuit that lies on the back of the display and that seems to have fixed it (been going for some months now). Seems it was a bad solder joint somewhere but I couldn’t pinpoint as I don’t have a microscope.

⟐ Answered September 12, 2021 at 3:47 GMT-7

Braun multipractic: The central spindle is split.

Fri, 16 May 2025 07:19:58 -0700

I managed to split the central axel due to a very hard piece of cheese. The split has spread out so the tools won’t go on. I have another machine to replace it, but I was cheated as this doesn’t work either. But it can be used for spares. Is there anything you can advice me on, or help me get this repaired somehow? I am in Manchester M9.

⟐ Answered Mai 16, 2025 at 7:19 GMT-7

Food Processor: Ginnys brand food processor

Sat, 01 Nov 2025 07:19:12 -0700

My food processor 10 in 1 doesn't spin. My Mom over loaded the processer and now the spinner doesn't spin. Motor works and I can see that internally it is spinning but the white top that is visible doesnt. I can't find anything in the guide. It says Intertek inside but can't seem to find much help from their website either. It looks as if it's a single unit with the spinner to one side. Please help

⟐ Commented November 01, 2025 at 7:19 GMT-7