⟐ Answered März 24, 2026 at 7:31 GMT-7

⟐ Commented Februar 10, 2026 at 9:34 GMT-7

⟐ Answered Februar 16, 2025 at 7:12 GMT-7

Ich wollte fragen wie ich am besten windows 10 von meiner hdd auf meine nvme übertragen kann, damit mein PC schneller startet

Vielen Dank für die antwort

⟐ Answer edited September 21, 2020 at 9:47 GMT-7

⟐ Commented August 29, 2026 at 20:16 GMT-7

⟐ Commented August 22, 2026 at 8:15 GMT-7

Body: I am trying to flash a custom Allwinner H618 Android TV box / embedded board (Model: BA882_141_V1.0 22244) from a defunct manufacturer, and I don't have the original backup firmware.

Details:

• SoC: Allwinner H618
• RAM Chips: 4x 4EE77 D9QBQ (batch codes vary slightly: HFB7, H8JP, HHTC)
• Symptom: Every compatible firmware I've tried stops flashing at around 44%–45% and throws error 0x161 (Download Boot Failed). The front display doesn't light up, and only the optical port LED stays on.
• What I've tried: Tested multiple generic firmwares matching the hardware, but they all fail at the bootloader/DRAM initialization stage due to missing custom boot parameters.

Is there a known workaround, or a way to build/modify a compatible bootloader or DRAM configuration to bypass this error without the original factory

⟐ Edited by author August 21, 2026 at 9:56 GMT-7

⟐ Answered August 02, 2026 at 9:22 GMT-7

I live by the old maxim "Use it up, wear it out, make it do, or do without." Other than being outmoded, this computer is completely capable. Everything on it works except the floppy disk, even an old NVidia graphics card that I scavenged from my previous computer. I remove the power cord every night to let it cool down, and it boots up immediately, but it's beginning to load slowly. One case fan has been replaced. Nevertheless, it works and I can live with the delays.

I was wondering if there might be another Linux distro that was aimed at keeping legacy BIOS computers working their best.

Can y'all recommend anything?

I have all my data saved to an external hard drive and everything is backed up to a different, elderly external hard drive which isn't connected unless it's being used. I have a pure sine wave UPS and a whole house surge suppressor.

⟐ Answer accepted Juli 20, 2026 at 4:40 GMT-7

⟐ Edited Juni 28, 2026 at 7:23 GMT-7

⟐ Answered Juni 28, 2026 at 7:01 GMT-7

I am not sure if anyone can help with this, but thought I'd check here anyway. I have been trying to find a cause for this issue for months and have found no solutions whatsoever.

This has happened in both Chrome and Edge, so I know it must be a Windows issue. So, when I am in my browser, and I am doing work, being productive, without any clear cause, the browser page will revert back to the previous page. In some of the work I do, this results in lost work and having to start over which is highly annoying and results in a lot of wasted time and aggravation.

It does not have anything to do with my mouse or keyboard, as both of those have been replaced and it has not solved the issue. There are no keyboard hotkeys assigned to move the browser page forward or back. I don't use the touchpad but no gesture settings are assigned to perform this function. I am at my wit's end and am seriously considering switching my whole set up to my Mac mini, which would be a hassle but I am so tired of this happening with no fix or useable advice.

I have searched the internet many times for a solution, and this seems to have been an ongoing issue with Windows on different PCs for a long time from what I can see, so I am hesitant to say that it is only an issue with my specific computer.

Has this happened to anyone else, and did you ever find a solution? The most advised solution from any kind of support has been to do a clean Windows install which seems like a huge deal with no guarantee of a fix.

⟐ Commented Mai 21, 2026 at 8:50 GMT-7

I don't know if this is a hardware or software problem. I updated my FireFox to 3.6.4 last night and it recommended installing the new Adobe ( I think Flash). Safari windows will not open, Software Update fails to function or even open. I had heard something about Adobe and Apple having a tussel. This is unacceptable. Has Adobe put the screws to me? Anyone else run into this problem?

It was install_flash_player_osx_ub(2).dmg Just downloaded Safari 5.0 and will try installing again. Re-install failed.

It probably is Adobe http://blogs.computerworld.com/adobe_fla... The question now is how to fix it. I download and ran Flash uninstaller and the problem persists.

UPDATE - I used the amnesia to remove flash, firefox and safari. I then reinstalled the Safari. It opens but no window and can't log into Apples software update. I would use migration assistant to restore the older versions but they're on an intel MBP and I don't know if that would work. Any suggestions would be welcomed at this point. I used migration assistant to move the Library from an old system on a second HD and it restored my ability to use Safari again. Software update still does nothing.

⟐ Commented Mai 11, 2026 at 21:47 GMT-7

⟐ Commented April 30, 2026 at 17:38 GMT-7

⟐ Commented April 28, 2026 at 5:04 GMT-7

⟐ Edited April 01, 2026 at 0:18 GMT-7

List of things I have already tried (in no particular order):

• Restarting Chrome
• Restarting computer
• Resetting Chrome settings
• Clearing cache and cookies
• Re-installing Chrome
• Going incognito
• Disabling/removing extentions
• Using the software removal tool
• Troubleshooting
• Using guest profile

The only thing that has been suggested to me that I have not yet tried is using Chrome Beta and Chrome Canary. I will eventually try them if nothing better can be suggested to me. I would prefer them to be a last resort though, as I do not want to risk any bugs.

As for which version of Windows and Chrome I have, it's Windows 10 and Chrome 60.0.3112.101

⟐ Commented März 24, 2026 at 4:50 GMT-7

⟐ Answered März 23, 2026 at 22:29 GMT-7

I'm completing a project at uni, and we're incorporating meshtastic into our project solution. I was having trouble finding answers regarding maintenance and repair, and was wondering if you could help! thanks !

What is the maintenance of nodes/mesh networks like?

How often are maintenance checks done/do nodes need to be regularly maintained?

How would you go about repairing/replacing nodes?

Thank you !!

⟐ Answered Februar 02, 2026 at 14:55 GMT-7