⟐ Answer accepted Juni 12, 2023 at 15:47 GMT-7

Ich hatte wegen Stickdrift und so meinen Switch Pro Controller mit dem GuliKit Ersatzteil aus dem Store hier ausgestattet. Nach der Mod funktioniert das horizontale Potentiometer/TMR Dingens des rechten Sticks nicht mehr. Um sicherzustellen, dass das TMR Teil nicht defekt ist, habe ich danach noch einmal das originale Potentiometer eingebaut. Das funktioniert auch nicht mehr.

Also ist wahrscheinlich irgendetwas mit dem Board nicht richtig? Ich kann allerdings keinen mechanischen Schaden entdecken. Ich füge mal Bilder an falls es doch etwas gibt und ich nur blind bin ;)

Auf den Bildern ist der rechte Stick abgelötet damit man sehen kann, dass die Pads nicht beschädigt sind und andere SM Komponenten besser sichtbar sind. Die Lötpunkte waren kein Problem, ich hatte Flux benutzt, alle waren wie aus dem Bilderbuch ;)

ich habe massive Input Lags mit meinem Switch Pro Controller (Zelda Limited Edition).

Wenn ich den Controller einschalte funktioniert alles für 10-30 Sekunden ganz normal. Und dann gehen die Input Lags los. Teilweise braucht die Konsole 5-10 Sekunden!! um auf meine Eingabe zu reagieren.

Ich habe es im Dock und außerhalb probiert: gleiches Problem.

Ich habe versucht den Controller zu updaten: Wireless steht das Update nach 15 Minuten immer noch auf 0%. Mit Kabel schlägt das Update sofort fehl.

Kabelgebunden funktioniert der Controller übrigens tadellos 🤷🏼‍♂️

Vielleicht kennt einer von euch ja das Problem und kann mir behilflich sein.

Mit freundlichen Grüßen

Robin M.

[edit by Mod: "Leg / Lag" für bessere Verständlichkeit angepasst :-)

Leg = Bein

Lag = Verzögerung

⟐ Edited Juni 21, 2024 at 0:41 GMT-7

⟐ Commented Juli 25, 2022 at 11:42 GMT-7

My Switch Pro Controller works fine, calibration-wise its perfect. The thing is in the mechanical aspect. The left Joystick gets physically stuck when I move it to the uprigh or upleft position.

I live in Ecuador so there is no official Nintendo Repair shop here so I opened it myself (have done this with other consoles and controllers) to see if there was some dust inside or any material preventing it to return and there was nothing. I came to realise that is was a problem with the stick itself connected to the controller motherboard... aparently it gets jammed, maybe some of the moving plastic are making too much friction with each other.

The question is. Is there anything I can do? because the part is sodered to the mainboard so there's no way I'm equipped to take it out, nor would I want to do that. Maybe there is a way to make the plastic get unstuck. When I pressure the stick down, but not down enough to trigger the joystick button press it moves quite fine.

Any help or comment would be apreciated!

Thanks!

As a new piece of info, I opened it again and heard a clicking sound when i push the stick. Seems to be a very tight fit between the plastics. The right joystick doesn't do that sound.

I am going to try using a blower at some point to see if there is something stuck in there

⟐ Commented Juli 11, 2022 at 0:09 GMT-7

I tried to use the controller but the sync button doesn't make turn on, nor do the shoulder buttons ot home button, I've tried charfing it but the charging led isn't lighting up, and it still doesn't work.

Anyone know of such an issue or a similiar one or about a fix.

Help is Much appreciated, thanks.

⟐ Commented September 16, 2019 at 10:59 GMT-7

Here’s what I know about the pro controller and the status of it:

• The battery works fine
• The ribbon cable and front button assembly is fine (This and the battery are not required for the controller to turn on)
• When plugged into my charger that lights up when connected, the light does not turn on, so the board isn’t taking any power.
• The rumble motors are disconnected right now, though I don’t see how that would cause it to not power on (I’ll try to reconnect them to test)
• EDIT: The power cable going from the battery board to the main board seems to be connected fine
• EDIT 2: there is no documentation online for this thing, so I decided to do some of my own investigation. I saw another reddit post that had a similar issue as mine, where it had no signs of life, and narrowed it down to being a short to ground on the charging chip (32LP052). I have yet to test this myself, but it is another clue

Unfortunately, there is limited documentation on the pro controller so it is hard to find any reference on what to troubleshoot for or what components to test, so hopefully some of you out there know something I can try to get it working again. I would love the help and it would mean so much for me

⟐ Answered März 30, 2025 at 11:38 GMT-7

⟐ Answered März 08, 2026 at 3:03 GMT-7

This little gray piece seems to be missing from the left stick (I havent cleaned it yet, sorry for the grossness): https://imgur.com/a/T52txDJ

Now I would have assumed that this piece was somewhere loose in the controller but I can't find it anywhere, and nothing fell out when I took it apart. Seems weird to me that it could have somehow wiggled out of the controller at any point because it isn't THAT small. Maybe I'm just blind.

Anyway, was hoping someone might be able to point me to a replacement piece, because while I know how to solder, I don't really WANT to replace the whole joystick, plus don't have the money for the replacement.

Alright, so ultimately since you can't seem to buy just that part, I bought $10 replacement sticks and just took that part off one of them. It just popped right out easy peasy. When snapping it into my original joystick however, while it fit perfectly, the joystick was lifting it up. Leads me to believe it wasn't actually the gray piece that failed but something to do with the casing of the joystick?

Anyway, I took some gorilla glue and a sewing needle and very carefully applied a small amount of glue underneath the gray piece as well as along its sides. Held it firmly in place for about 2 minutes and it stayed. I then applied a little more glue to the top of the little bracket.

Seems to have worked! We'll see if the glue stands the test of time though and keeps the piece in it's proper place!

⟐ Edited by author Mai 09, 2023 at 10:01 GMT-7

⟐ Answer accepted November 14, 2022 at 6:45 GMT-7

⟐ Commented August 07, 2025 at 12:31 GMT-7

⟐ Answered Februar 05, 2024 at 19:40 GMT-7

I’ve reopened it, removed the control stick knobs, cleaned with alcohol and compressed air and reassembled. I’ve also tried disassociated the controller with the switch and re-pairing. But I get the same result.

Clearly it sees the stick moving in the various directions so I’m at a loss as to why I can’t attempt the recalibration and my efforts aren’t getting me anywhere.

Anyone have some advice for me? This is the limited edition TotK one and I really want to preserve it!

⟐ Answer edited Juni 26, 2023 at 14:19 GMT-7

Decided to pickup a new hobby this year, electronics repair! I'm a noob. This switch pro controller had a drift stick problem, only a minor drift stick issue. I unsoldered the stick and put a new one on, but the drift stick is now worse. No matter what joystick I put on, the behaviour of the drift is EXACTLY the same. As you can see in the image below, i think there are some ripped pads. If it's even possible, how can I fix this? Or is there a work around with the soldering iron that I can perform to get this controller functional? Thanks!

⟐ Commented Januar 20, 2021 at 22:41 GMT-7

⟐ Commented August 26, 2023 at 13:41 GMT-7

A while ago I had a switch pro controller completely shut off on me, it no longer responds to the sync button, and the light that indicates charging no longer works either. I have been racking my brain trying to get this thing to work and I can’t seem to find anything that sticks. I have tried changing the batteries, changing the ribbon cables and using a different board for the buttons but nothing can get it to come back to life. The only thing I haven’t done yet is replacing the motors (the small ribbon cables for the motors ripped), but that shouldn’t be a problem if my issue is that no power goes to the board. I have yet to see if reflowing the charging chip will help, but I’m not comfortable enough with a hot air gun to do that anyway yet.

If anyone here has any suggestions they would be greatly appreciated.

⟐ Commented Januar 25, 2022 at 12:11 GMT-7

Anyone knows where the motion control sensor/gyro is located on the controller and what might be wrong?

I am unsure if this happened because of the teardown or just if I noticed it because of the testing after.