iFixit - Answers With Device "Turntable"

Reloop RP-4000 M3D: Geschwindigkeits Regler für 45rpm reagiert nicht mehr

Mon, 17 Feb 2025 18:02:45 -0700

Hat jemand vielleicht ähnliches Problem erfahren und hat einen Lösungsvorschlag?

Beim Betätigen des Knopfes keine Reaktion.

Demontageanleitubg etc..

Danke.

⟐ Answered Februar 17, 2025 at 18:02 GMT-7

Pro-Ject Debut III: Plattenspieler schaltet gleich wieder ab

Wed, 20 Feb 2019 03:11:14 -0700

Ich habe einen Debut III E (also mit Endabschaltung und seit heute schaltet er sich gleich nach dem Start des Plattentellers gleich wieder ab und stoppt. Was kann man tun? Dürfte entweder der Hauptschalter oder die automatische Endabschaltung sein.

⟐ Commented Februar 20, 2019 at 3:11 GMT-7

Pro-Ject Debut III: Wieso dreht sich mein Pro-ject Debut III in die falsche Richtung?

Sat, 06 Jun 2015 12:57:00 -0700

Ich habe mir vor kurzem einen gebrauchten Pro-ject debut III gekauft. heute als ich Platten hörte wurde er plötzlich langamer, fluktuierte in der Geschwindigkeit und spielte auf einmal im Uhrzeigersinn ab. dies geschieht meistens, wenn ich das Gerät ein und ausschalte. Ab und zu, ist aber eher rar, spielt er gegen den Uhrzeigersinn, also richtig ab.

Ich habe herausgefunden, das es sich hier eventuell um einen kaputten Kondensator handeln kann. Ich verstehe es mit einem Lötkolben umzugehn und traue mir auch zu das selber zu machen, nur finde ich im Internet keine anleitung, wie man das bei genau diesem Modell macht.

In English:

I recently bought a used Project Debut III and today suddenly the speed of the turntable fluctuated and then the Motor turned clockwise. if I turn the Player on and off a few times, sometimes it's the right direction but more often not. Can you help me with this Problem? I found out it could maybe be a Condenser. I can solder and am capable of understanding electronics, but i have no idea what to do exactly, because there are no Manuals to fix this, for this model, on the internet.

⟐ Edited Juni 06, 2015 at 12:57 GMT-7

Audio-Technica AT-LP120XUSB: Why is the tonearm not stoping?

Mon, 03 Aug 2026 05:52:51 -0700

When i play a record, and the songs end, it should stop before the center sticker, but it dosent and it goes in the middle

⟐ Answered August 03, 2026 at 5:52 GMT-7

AT-LP60X: Tone Arm is Lifting at the beginning

Mon, 03 Aug 2026 05:44:21 -0700

I have a AT-LP60X-BK Turntable. When I press start the tonearm moves over the record in the start position but when it drops on the record it immediately comes back up and parks and turns off. Is there an adjustment to fix this?

⟐ Answered August 03, 2026 at 5:44 GMT-7

Turntable: No power - dual 1209 repair

Thu, 16 Jul 2026 09:19:34 -0700

This is a dual 1209. The power doesn't work at all, not even a hum. The mechanism itself is working fine I think, the wheel is spinning (manually) and I hear clicking inside. Attached are a few photos of the inside including the power box. If there's an image or information I didn't give, please tell me. Would appreciate any help!

⟐ Commented Juli 16, 2026 at 9:19 GMT-7

Sony PS1100: How do I change the drive belt

Wed, 08 Jul 2026 15:53:21 -0700

How do I change the drive belt?

⟐ Commented Juli 08, 2026 at 15:53 GMT-7

Audio-Technica AT-LP120-USB: Lid won't stay in the up position

Tue, 02 Jun 2026 10:01:02 -0700

The lid constantly comes back down and won't stay in the up position. I looked at the hinge and it doesn't appear to have a tension type of adjustment that was obvious. The lid has been in the down position. I have not moved the turntable much since purchasing it. The hinges appear Ok.

⟐ Commented Juni 02, 2026 at 10:01 GMT-7

Crosley CR704: motor for turn table wont spin when powered on

Fri, 22 May 2026 18:58:58 -0700

pulled unit apart, check power to motor, won't turn, bad motor?

⟐ Answered Mai 22, 2026 at 18:58 GMT-7

Crosley CR42: How do I clean the laser on the CD player?

Fri, 24 Apr 2026 16:47:14 -0700

How do I access the laser in the CD player to clean it?

⟐ Answered April 24, 2026 at 16:47 GMT-7

Turntable: My record player makes a scratching noise when the platter spins?

Mon, 30 Mar 2026 17:44:17 -0700

My record player makes a scratching noise when the platter spins. The sound seems to come from the spindle in the middle. When I slightly pull the spindle to the left, the scratching stops, but when I let go it starts again. This makes me think the spindle or platter might be rubbing against something inside, and I don’t know how to fix it.

⟐ Commented März 30, 2026 at 17:44 GMT-7

Pro-Ject Debut III: pictures pcb for debut 3 phono and connector block

Wed, 25 Mar 2026 08:08:00 -0700

I wondered if anyone had any pictures of the PCB on a Debut iii phono, I replaced the motor which is all fine but i accidently pull the leads off the pcb, I have soldered them back on but only have one channel now, i have attached a couple of photo's, if someone could have a look to see if i have soldered them back on correctly?

Thanks in advance

Steve

Crosley CR704: CD player won't play

Wed, 11 Mar 2026 02:35:17 -0700

CD part turns on and door opens but won't play CD. Can this repaired?

⟐ Commented März 11, 2026 at 2:35 GMT-7

Audio-Technica AT-LP120-USB: Access and replace RCA speaker output jacks. Male ends of cable lodged

Thu, 29 Jan 2026 20:03:28 -0700

What is best way to open turntable assembly to replace the two RCA output jacks after the male ends of the speaker cables broke off in the jacks and cannot be removed? Also, is there a specific pair of output jacks that Audio Technica used for original and where can they be obtained for replacement ?

⟐ Answer edited Januar 29, 2026 at 20:03 GMT-7

Audio-Technica AT-LP120XUSB: How to open for service

Thu, 29 Jan 2026 19:48:53 -0700

What Screws must be removed to open the body of it turntable ?

⟐ Answer edited Januar 29, 2026 at 19:48 GMT-7

Sony PS-LX300USB: No power ever to my Sony Turntable? Help.

Thu, 15 Jan 2026 03:03:23 -0700

We have a brand new PS-LX300USB but live in Fiji so limited access to warranty and repairers.

Assembled just as advised. No power. Took the back off to check it was all in order. all connections look right but start key doesn’t click and when plugged in and you mannually spin it doesn’t turn on or spin.

any suggestions for repair would be appreciated.

tjanks

lisa

⟐ Answered Januar 15, 2026 at 3:03 GMT-7

Victrola Empire Record Player: My turntable is slow

Fri, 09 Jan 2026 22:39:32 -0700

Hi all I've had my turntable now for about 2 years, hardly used it tbh. I've more recently been using it but it's has started being slow. I have took the table off cleand the belt and and removed any excess grease and it's perfect for about 5 mins and then it going slow again. Any ideas... maybe the belt ?

⟐ Commented Januar 09, 2026 at 22:39 GMT-7

Crosley CR8005A: The light didn’t turn on so I opened it up and noticed this was off

Tue, 30 Dec 2025 07:16:32 -0700

I only spent 15 dollars, is it worth fixing it?

⟐ Commented Dezember 30, 2025 at 7:16 GMT-7

Crosley CR42: The volume control is stuck in the loudest position. Can I fix this m?

Thu, 13 Nov 2025 12:11:54 -0700

My volume control is stuck in the loudest position. Can I fix this myself or is there somewhere I can go to have it fixed?

Crosley CR 78CD: When playing a record, it distorts.

Sat, 04 Oct 2025 18:44:12 -0700

I was playing a record (Shel Silverstein's Drain My Brain, 2025 colored vinyl) and I put it on Side B. Sounds like a normal thing, right? As soon as the music started playing, it was highly distorted. Any answers?

⟐ Answer accepted Oktober 04, 2025 at 18:44 GMT-7