iFixit - Answers With Device "ifixit Screwdriver"

ifixit Screwdriver: Wie kann ich das blaue Ende vom Schraubenzieher trennen?

Mon, 28 Jul 2025 03:23:47 -0700

Ich hatte die Idee, als Geschenk für 2 Freunde jeweils 1 Mako-Schraubenzieher-Set zu personalisieren, indem ich (unter anderem) das blaue Endstück umlackiere. Online habe ich bis jetzt leider noch nichts dazu gefunden, wie ich dieses Endstück nun selbst und ohne grössere Schäden abnehmen könnte. Anleitungen zum Wiederanbringen gibt es ja schon.

Ich wäre überaus dankbar, wenn mir jemand dabei aushelfen könnte.

⟐ Answer edited Juli 28, 2025 at 3:23 GMT-7

ifixit Screwdriver: Mako Precision Bit Set Durcheinander

Fri, 12 Jan 2024 01:47:30 -0700

Hallo Zusammen, bei mir ist im Mako Precision Bit Set nach den Jahren ein heilloses Durcheinander. Leider kann ich bei vielen Steckplätzen kaum noch erkennen was reingehört. Habe mir schon einige Schrauben fast versaut weil ich zuerst den falschen Aufsatz genutzt habe. Gibt es irgendwo ein Schema wie der Kasten mit den Bits sortiert ist? Etwas zum Drucken oder als PDF?

⟐ Commented Januar 12, 2024 at 1:47 GMT-7

ifixit Screwdriver: Schraubenzieher Kopf von ifixit ist lose

Thu, 09 Dec 2021 01:24:14 -0700

Hallo,

habe es bei den Schraubenzieher von ifixit geschafft den “Kopf” des Schraubenziehers abzuschrauben. Da das Gewinde sich, innerhalb dreht und auch der Kopf selber dreht wollte ich mal fragen ob jemand da eine Idee hat das wieder fest zu kriegen?

Freue mich schon auf eure Ideen

⟐ Commented Dezember 09, 2021 at 1:24 GMT-7

ifixit Screwdriver: Are the TR10 and TR8 screwdrivers interchangeable with T10 and T8?

Sun, 21 Apr 2019 03:40:55 -0700

Hi!

Thank you for your great guide! I have a question regarding the Torx screwdriver sizes. I own a toolset that includes T6, T8, and T10 sizes as well as a few others. In your guide, it is listed that a "TR10" and a "TR8" screwdriver is needed. After watching several videos pertaining to hard drive replacement, many people claim that they are using the standard T10 and T8 sizes. Is there any difference between the "TR" labeled screwdrivers and the standard "T" ones? I don't want to have to buy these two screwdrivers if the ones I currently own will work. Please advise. Thank you!

⟐ Edited April 21, 2019 at 3:40 GMT-7

ifixit Screwdriver: Are the screw tips in ifixit essential toolkit are magnetized?

Thu, 10 Jul 2025 12:04:20 -0700

Hii. Are the tips magnetized in ifixit essential toolkit and can hold screws ?

⟐ Answered Juli 10, 2025 at 12:04 GMT-7

ifixit Screwdriver: Spinning top fell off from 1/4" driver. How to repair?

Tue, 30 Apr 2024 18:21:48 -0700

Hi,

The spinning top of my 1/4" driver fell off. The screw is still inside the handle under the bearing. I haven't found a guide on how to repair this.

⟐ Answered April 30, 2024 at 18:21 GMT-7

ifixit Screwdriver: T6H, T7H, T8H, T9H, T10H - vs - TR6, TR7, TR8, TR9, TR10

Sat, 21 Feb 2026 20:20:13 -0700

Is the T6H, T7H, T8H, T9H, T10H -bit identical to the (torx security) TR6, TR7, TR8, TR9, TR10 -bit? And what is the reason for the difference in naming?

I’m deciding whether to buy a precision screwdriver kit.

T[…]H:

vs TR[…]:

⟐ Commented Februar 21, 2026 at 20:20 GMT-7

ifixit Screwdriver: Torx screwdriver: Is TT10 the same as TR10?

Fri, 31 May 2019 05:09:01 -0700

I need a Torx TR10 screwdriver, but I have something call a TT10x7 by Stanley. Are these the same thing? It appears to be the same shape complete with hole in the middle (I’ve attached some screenshots) but wanted to check first. I also have a TT25x100, would this be the same thing as a Torx TR25?

⟐ Answered Mai 31, 2019 at 5:09 GMT-7

ifixit Screwdriver: 2 bits Stuck together, how I can remove them?

Fri, 26 Jun 2020 16:37:12 -0700

I was assembling my project with a screwdriver bit with the new drill, I used the drill adapter, but it was soo strong, now the 2 bits, the 1/4 to 4mm and the square key is stuck inside the adapter, how I can separate them again?

Here's how my bit is stuck now

https://i.imgur.com/z5AMxD9.jpg

https://i.imgur.com/stYmMuf.jpg

⟐ Commented Juni 26, 2020 at 16:37 GMT-7

ifixit Screwdriver: Is it normal that my screwdriver doesn’t fit the case anymore?

Fri, 05 Jan 2024 09:54:29 -0700

Hy My screwdriver doesn’t fit the case anymore

The picture of the screwdriver doesn’t fitting

⟐ Commented Januar 05, 2024 at 9:54 GMT-7

ifixit Screwdriver: Precision driver to 1/4" shank bit adapter

Tue, 22 Oct 2019 03:04:14 -0700

I want to be able to use my 1/4” bits with the precision drivers I have. I’ve looked locally but couldn’t find such a thing. The piece I need could be either a female to female 1/4” hex since I already can adapt my precision shank to a 1/4” shank, or, preferably, I would like to go directly from a 4mm shank to a female 1/4” hex or even a chuck that could work with 1/4” bits would be kind of ok. Thanks for any input… I’ve already heard this is a weird request from a few people.

⟐ Answered Oktober 22, 2019 at 3:04 GMT-7

ifixit Screwdriver: Why magnetizing is present only on one side of flexible holder?

Wed, 27 Nov 2024 13:30:29 -0700

Why in “iFixit 64 Bit Driver Kit” magnetizing is present only on one side of flexible holder? It is missing on side on which you attach selected bit, which makes them fall out when moved to more horizontal position.

Below is image to show what I am exactly referring to:

⟐ Answered November 27, 2024 at 13:30 GMT-7

iFixit Screwdriver: Where can I buy this?

Mon, 15 Apr 2024 14:00:38 -0700

Hello,

I was currently hired to work in a phone repair shop. While working here, I became increasingly familiar with using a certain screwdriver. Since there are many people working here, we all came to love this particular tool and since we only have one, it's a hassle to keep sharing it. I was wondering how can I buy this screwdriver, it is not listed in the iFixit parts :(.

PART DESCRIPTION

Silver screwdriver

the length is about 1/2 an inch the size of an iphone 6

it has three pieces of rubber near the head for your thumb, they are lined up in perfect parallel lines.

Bottom side has a white ifixit logo with a big hole going through that side of the tool

Thanks!

⟐ Commented April 15, 2024 at 14:00 GMT-7

ifixit Screwdriver: Cap came off screwdriver

Thu, 30 Mar 2023 11:28:38 -0700

The cap came off of my ifixit screwdriver and I can't see how to get it reattached. I don't see any screw threads. Can. you tell me how to fix this?

⟐ Answered März 30, 2023 at 11:28 GMT-7

ifixit Screwdriver: Is there ball end hex for iFixit screwdriver? I can only see straight

Wed, 06 Sep 2023 07:11:18 -0700

Hi, is there ball end hex for iFixit screwdriver ?

I have iFixit 64 bits, and I can only see straight. I need a ball end to reach screw by an angle. Where can I buy these bits for iFixit screwdriver ?

⟐ Answer edited September 06, 2023 at 7:11 GMT-7

ifixit Screwdriver: iPhone 7 tripoint screwdriver

Tue, 30 Aug 2022 16:07:33 -0700

Ho do I purchase a tri point screwdriver

⟐ Answer edited August 30, 2022 at 16:07 GMT-7

ifixit Screwdriver: How do I fix the bottom part that lets you spin the screwdriver

Mon, 07 Oct 2024 12:20:54 -0700

I don’t even know how it happened but I’d like to fix my screwdriver.

⟐ Commented Oktober 07, 2024 at 12:20 GMT-7

ifixit Screwdriver: Could I get a replacement?

Thu, 29 Aug 2024 18:34:58 -0700

I lost my ifxit tech pro screw drivers and number 1 phillips bit and i was wondering if i could buy those parts specifically

⟐ Commented August 29, 2024 at 18:34 GMT-7

ifixit Screwdriver: Refitting Blue Top Cap

Sun, 21 Apr 2024 11:45:06 -0700

How are you supposed to refit the blue cap, seems like a poor design, ive barely used my kit and the stupid blue cap which is screwed in just undoes, seems like a stupid design to me. Surely this has happened to others, cant figure out how to get it back on.

⟐ Answer accepted April 21, 2024 at 11:45 GMT-7

ifixit Screwdriver: Good Day, I would like to ask if the Screwdriver Handle, Extension Rod

Tue, 09 Jan 2024 05:00:41 -0700

Good Day, I would like to ask if the Screwdriver Handle, Extension Rod & Driver Bits are made from Stainless Steel for rustproofing/corrosion resistance? I am interested in purchasing to augment my PC Repair Jobs.

⟐ Commented Januar 09, 2024 at 5:00 GMT-7