Zum Hauptinhalt wechseln
Hilfe

Aktuelle Version von: oldturkey03 (Bewertungsdetails) ,

Titel:

Possible SMC damage from liquid spill - needs a logic board?

Text:

My neighbor asked me to see what I could do with a MacBook Air, model A1369 EMC 2392. I believe it was purchased in late 2010 or early 2011. It has had water spilled on the keyboard. They dried it out but it did not seem to want to boot up. I took it apart, disconnected most of the cables, and reconnected them to hopefully refresh those connections.
 
After working with it for a while I decided to try pointing a flashlight at the screen, and I determined that it had no backlight. Apparently this model has an LED backlight. I can use the system if I connect to an external monitor. However, it seems to want to go to sleep almost immediately as if the screen was in the closed position. I can keep it going by constantly moving my finger on the touchpad.
 
After reading lots of good information on this web site, I have reset the System Management Controller (SMC) and the PRAM. The resets seemed to take okay but the symptoms have not improved.
 
I am now thinking that the SMC circuits could have been damaged by the liquid spill. This is the first time I have ever cracked open any type of Mac so my experience is very limited and any advice is welcome. If the SMC is damaged, I have no idea if it could be replaced or if the entire logic board would have to be swapped out. Does this system need a logic board?
 
Edit on 7/7/13: I have attempted to add a shot of the system with the back cover removed. I will take closeups of the connectors that could be problems.
 
[image|265798|align=left]
 
 
 
Okay, it took me a while to get even halfway decent closeups after some business travel. I have never done much macro photography and certainly never tried to shoot anything like a circuit board. I have marked one of the most corroded areas in this shot.
 
[image|269198image|269198|align=left]
[image|269198image|269198|align=left]
 
Here are a couple more closeups. Can anyone mark the connector is for the cover sensor?
 
[image|269199]

image|269199|align=left]
[image|269199]

image|269199|align=left]
 
[image|269197image|269197|align=left]
[image|269197image|269197|align=left]

Gerät:

MacBook Air 13" Late 2010

Status:

open

Akzeptierte Antwort:

134600

Bearbeitet von: dlsnook ,

Titel:

Possible SMC damage from liquid spill - needs a logic board?

Text:

My neighbor asked me to see what I could do with a MacBook Air, model A1369 EMC 2392. I believe it was purchased in late 2010 or early 2011. It has had water spilled on the keyboard. They dried it out but it did not seem to want to boot up. I took it apart, disconnected most of the cables, and reconnected them to hopefully refresh those connections.
 
After working with it for a while I decided to try pointing a flashlight at the screen, and I determined that it had no backlight. Apparently this model has an LED backlight. I can use the system if I connect to an external monitor. However, it seems to want to go to sleep almost immediately as if the screen was in the closed position. I can keep it going by constantly moving my finger on the touchpad.
 
After reading lots of good information on this web site, I have reset the System Management Controller (SMC) and the PRAM. The resets seemed to take okay but the symptoms have not improved.
 
I am now thinking that the SMC circuits could have been damaged by the liquid spill. This is the first time I have ever cracked open any type of Mac so my experience is very limited and any advice is welcome. If the SMC is damaged, I have no idea if it could be replaced or if the entire logic board would have to be swapped out. Does this system need a logic board?
 
Edit on 7/7/13: I have attempted to add a shot of the system with the back cover removed. I will take closeups of the connectors that could be problems.
 
[image|265798image|265798|align=left]



Okay, it took me a while to get even halfway decent closeups after some business travel. I have never done much macro photography and certainly never tried to shoot anything like a circuit board. I have marked one of the most corroded areas in this shot.

[image|269198]

Here are a couple more closeups. Can anyone mark the connector is for the cover sensor?

[image|269199]



[image|269197
]
[image|265798image|265798|align=left]



Okay, it took me a while to get even halfway decent closeups after some business travel. I have never done much macro photography and certainly never tried to shoot anything like a circuit board. I have marked one of the most corroded areas in this shot.

[image|269198]

Here are a couple more closeups. Can anyone mark the connector is for the cover sensor?

[image|269199]



[image|269197
]

Gerät:

MacBook Air 13" Late 2010

Status:

open

Bearbeitet von: dlsnook ,

Titel:

Possible SMC damage from liquid spill - needs a logic board?

Text:

My neighbor asked me to see what I could do with a MacBook Air, model A1369 EMC 2392. I believe it was purchased in late 2010 or early 2011. It has had water spilled on the keyboard. They dried it out but it did not seem to want to boot up. I took it apart, disconnected most of the cables, and reconnected them to hopefully refresh those connections.
 
After working with it for a while I decided to try pointing a flashlight at the screen, and I determined that it had no backlight. Apparently this model has an LED backlight. I can use the system if I connect to an external monitor. However, it seems to want to go to sleep almost immediately as if the screen was in the closed position. I can keep it going by constantly moving my finger on the touchpad.
 
After reading lots of good information on this web site, I have reset the System Management Controller (SMC) and the PRAM. The resets seemed to take okay but the symptoms have not improved.
 
I am now thinking that the SMC circuits could have been damaged by the liquid spill. This is the first time I have ever cracked open any type of Mac so my experience is very limited and any advice is welcome. If the SMC is damaged, I have no idea if it could be replaced or if the entire logic board would have to be swapped out. Does this system need a logic board?
 
Edit on 7/7/13: I have attempted to add a shot of the system with the back cover removed. I will take closeups of the connectors that could be problems.
 
[image|265798]

Gerät:

MacBook Air 13" Late 2010

Status:

open

Bearbeitet von: Dan ,

Titel:

Possible SMC damage from liquid spill - needs a logic board?

Text:

My neighbor asked me to see what I could do with a MacBook Air, model A1369 EMC 2392. I believe it was purchased in late 2010 or early 2011. It has had water spilled on the keyboard. They dried it out but it did not seem to want to boot up. I took it apart, disconnected most of the cables, and reconnected them to hopefully refresh those connections.
 
After working with it for a while I decided to try pointing a flashlight at the screen, and I determined that it had no backlight. Apparently this model has an LED backlight. I can use the system if I connect to an external monitor. However, it seems to want to go to sleep almost immediately as if the screen was in the closed position. I can keep it going by constantly moving my finger on the touchpad.
 
After reading lots of good information on this web site, I have reset the System Management Controller (SMC) and the PRAM. The resets seemed to take okay but the symptoms have not improved.
 
I am now thinking that the SMC circuits could have been damaged by the liquid spill. This is the first time I have ever cracked open any type of Mac so my experience is very limited and any advice is welcome. If the SMC is damaged, I have no idea if it could be replaced or if the entire logic board would have to be swapped out. Does this system need a logic board?
 
 
 
MacBook Air 13" Model A1369

Gerät:

MacBook Air 13" Late 2010

Status:

open

Bearbeitet von: Dan ,

Titel:

Possible SMC damage from liquid spill - needs a logic board?

Text:

My neighbor asked me to see what I could do with a MacBook Air, model A1369 EMC 2392. I believe it was purchased in late 2010 or early 2011. It has had water spilled on the keyboard. They dried it out but it did not seem to want to boot up. I took it apart, disconnected most of the cables, and reconnected them to hopefully refresh those connections.
 
After working with it for a while I decided to try pointing a flashlight at the screen, and I determined that it had no backlight. Apparently this model has an LED backlight. I can use the system if I connect to an external monitor. However, it seems to want to go to sleep almost immediately as if the screen was in the closed position. I can keep it going by constantly moving my finger on the touchpad.
 
After reading lots of good information on this web site, I have reset the System Management Controller (SMC) and the PRAM. The resets seemed to take okay but the symptoms have not improved.
 
I am now thinking that the SMC circuits could have been damaged by the liquid spill. This is the first time I have ever cracked open any type of Mac so my experience is very limited and any advice is welcome. If the SMC is damaged, I have no idea if it could be replaced or if the entire logic board would have to be swapped out. Does this system need a logic board?
 
 
 
MacBook Air 13" Model A1369

Gerät:

MacBook Air 13" Model A1369Late 2010
MacBook Air 13" Model A1369Late 2010

Status:

open

Ursprünglicher Beitrag von: dlsnook ,

Titel:

Possible SMC damage from liquid spill - needs a logic board?

Text:

My neighbor asked me to see what I could do with a MacBook Air, model A1369 EMC 2392.  I believe it was purchased in late 2010 or early 2011.  It has had water spilled on the keyboard.  They dried it out but it did not seem to want to boot up.  I took it apart, disconnected most of the cables, and reconnected them to hopefully refresh those connections.

After working with it for a while I decided to try pointing a flashlight at the screen, and I determined that it had no backlight.  Apparently this model has an LED backlight.  I can use the system if I connect to an external monitor.  However, it seems to want to go to sleep almost immediately as if the screen was in the closed position.  I can keep it going by constantly moving my finger on the touchpad.

After reading lots of good information on this web site, I have reset the System Management Controller (SMC) and the PRAM.  The resets seemed to take okay but the symptoms have not improved.

I am now thinking that the SMC circuits could have been damaged by the liquid spill.  This is the first time I have ever cracked open any type of Mac so my experience is very limited and any advice is welcome.  If the SMC is damaged, I have no idea if it could be replaced or if the entire logic board would have to be swapped out.  Does this system need a logic board?

Gerät:

MacBook Air 13" Model A1369

Status:

open