Ursprünglicher Beitrag von: originalmachead ,
''The machine will not fix himself -'' no matter how long you wait. You have a physically damaged logic board. '''This is a very advanced DIY project.''' You might have some luck stripping down the entire machine and cleaning the logic board, as you do that you need a magnifying glass to look for burned or corroded parts on the logic board. Or, you might have destroyed the logic board by turning the machine on while it was wet. Reading your error report you have a lot of potentially damaged components. ''Follow some of the similar Questons from the''' tags at right '''to see what sort of work you're in for.'' If you find burned components, you'll have to replace the logic board, or hire someone to fix the components. '''Replacing the entire logic board an advanced DIY project''' ''is the easiest, quickest DIY repair'' ''If this Answer is helpful '''please remember to return and mark it '''Accepted.''