Zum Hauptinhalt wechseln
Hilfe

Aktuelle Version von: Josh ,

Text:

Have you made sure the connector is seated properly? Or have you tried another screen to be certain it is the digitizer and not the board connector?
== Update ==
 
With looking at the picture, yes you would need to desolder the connector and solder a new one on. Sorry for the bad news.
 
 
 
IF you would like to compare check out this
 
 
 
[http://d3nevzfk7ii3be.cloudfront.net/igi/BGgDnXKAqRemrFeM.huge|iPad Mini Wi-Fi Digitizer Connector]
 
 
 
You will see no gap in the gold prongs.

Status:

open

Ursprünglicher Beitrag von: Josh ,

Text:

Have you made sure the connector is seated properly? Or have you tried another screen to be certain it is the digitizer and not the board connector?

Status:

open