Zum Hauptinhalt wechseln
Hilfe

Aktuelle Version von: Marty Rippens ,

Text:

Turn the iPad off completely. Connect to the USB on the computer while holding down the home and power buttons. That will send it into restore mode. From there itunesthere, iTunes will pop up on your computer clickcomputer. Click on restore and update. confirmConfirm the update and restore. It will turn the iPad off and on as it extracts the software and resets the iPad. This should send it back to factory settings unless it is locked with an apple ID if soApple ID. If so, enter your information on the computer when it promptsprompts, and you should be all good!
Turn the iPad off completely. Connect to the USB on the computer while holding down the home and power buttons. That will send it into restore mode. From there itunesthere, iTunes will pop up on your computer clickcomputer. Click on restore and update. confirmConfirm the update and restore. It will turn the iPad off and on as it extracts the software and resets the iPad. This should send it back to factory settings unless it is locked with an apple ID if soApple ID. If so, enter your information on the computer when it promptsprompts, and you should be all good!
 
=== Update ===
 
Turn off the ipad plugipad. Plug in your cable turncable. Turn on your iPad and hold down the home button at the same time. If that doesn't work then,then pull up iTunes on your desktop and then try the process all over again theagain. The power has to be off thoughoff, though, on the iPadiPad.
Turn off the ipad plugipad. Plug in your cable turncable. Turn on your iPad and hold down the home button at the same time. If that doesn't work then,then pull up iTunes on your desktop and then try the process all over again theagain. The power has to be off thoughoff, though, on the iPadiPad.

Status:

open

Bearbeitet von: kerri ,

Text:

Turn the iPad off completely. Connect to the USB on the computer while holding down the home and power buttons. That will send it into restore mode. From there itunes will pop up on your computer click on restore and update. confirm the update and restore. It will turn the iPad off and on as it extracts the software and resets the iPad. This should send it back to factory settings unless it is locked with an apple ID if so enter your information on the computer when it prompts and you should be all good!
 
=== Update ===
 
Turn off the ipad plug in your cable turn on your iPad and hold down the home button at the same time. If that doesn't work then pull up iTunes on your desktop and then try the process all over again the power has to be off though on the iPad

Status:

open

Ursprünglicher Beitrag von: kerri ,

Text:

Turn the iPad off completely.  Connect to the USB on the computer while holding down the home and power buttons.  That will send it into restore mode.  From there itunes will pop up on your computer click on restore and update.  confirm the update and restore.  It will turn the iPad off and on as it extracts the software and resets the iPad.  This should send it back to factory settings unless it is locked with an apple ID if so enter your information on the computer when it prompts and you should be all good!

Status:

open