Zum Hauptinhalt wechseln
Hilfe

Aktuelle Version von: Robert Zappulla

Original-Beitrag von::

Had the same 0E error. And dishwasher wouldn't drain fully. I took the hose off at the sink and drained it into a bucket a few times at the start of the cycle, so the pump and drain were working.
-I read the post about pumping air from the drain end of the hose. I use a can or air (like for computers) and sealed the hose with my finger against the aircan tube, and wallah, it gurgled and bubbled back up inside the bottom of the dishwasher. did this 2 more times. Ran the dishwasher and it worked fine. May ave been a coincident or dumb luck, but tried everything short of taking it apart before this.
+I read the post about pumping air from the drain end of the hose. I use a can or air (like for computers) and sealed the hose with my finger against the aircan tube, and wallah, it gurgled and bubbled back up inside the bottom of the dishwasher. did this 2 more times. Ran the dishwasher and it worked fine. May have been a coincident or dumb luck, but tried everything short of taking it apart before this.

Status:

open

Bearbeitet von: Robert Zappulla

Original-Beitrag von::

-Had the same 0E error. And dishwasher wouldn't drain fully. I took the hose of and drained it into a bucket a few times at the start of the cycle, so the pump and drain were working.
+Had the same 0E error. And dishwasher wouldn't drain fully. I took the hose off at the sink and drained it into a bucket a few times at the start of the cycle, so the pump and drain were working.
I read the post about pumping air from the drain end of the hose. I use a can or air (like for computers) and sealed the hose with my finger against the aircan tube, and wallah, it gurgled and bubbled back up inside the bottom of the dishwasher. did this 2 more times. Ran the dishwasher and it worked fine. May ave been a coincident or dumb luck, but tried everything short of taking it apart before this.

Status:

open

Original-Beitrag von: Robert Zappulla

Original-Beitrag von::

Had the same 0E error. And dishwasher wouldn't drain fully. I took the hose of and drained it into a bucket a few times at the start of the cycle, so the pump and drain were working.

I read the post about pumping air from the drain end of the hose. I use a can or air (like for computers) and sealed the hose with my finger against the aircan tube, and wallah, it gurgled and bubbled back up inside the bottom of the dishwasher. did this 2 more times. Ran the dishwasher and it worked fine. May ave been a coincident or dumb luck, but tried everything short of taking it apart before this.

Status:

open