Zum Hauptinhalt wechseln
Hilfe

Aktuelle Version von: Lesya H ,

Text:

Hi All,
 
What I have come across with is that not all panels are prone to this "fantom" issue.
 
I had compared 2 digitizers from 2 different manufacturers.
 
Properly designed digitizers have visible traces only on one side of the frame and all traces are covered with transparent insulator. There is no need for extra tape, they will work properly as they are.
Properly designed digitizers have visible traces only on one side of the frame and all traces are covered with transparent insulator. There is no need for extra tape, they will work properly as they are.
 
Poorly designed digitizer hasdigitizers have traces on all 4 sides of the frame and no insulator. Hence need for an additional insulator to work properly.
Poorly designed digitizer hasdigitizers have traces on all 4 sides of the frame and no insulator. Hence need for an additional insulator to work properly.
 
I have also used 2mm 3M tape as mentioned above to insulate all 4 sides of the frame.
 
Frames can be silver or gold it makes no difference.
 
Thanks and Regards
 
[image|747613]
[image|747613]
 
[image|749585]

Status:

open

Bearbeitet von: Lesya H ,

Text:

Hi All,
 
What I have come across with is that not all panels are prone to this "fantom" issue.
 
I had compared 2 digitizers from 2 different manufacturers.
 
Properly designed digitizers have visible traces only on one side of the frame and all traces are covered with transparent insulator.
 
Poorly designed digitizer has traces on all 4 sides of the frame and no insulator. Hence need for an additional insulator to work properly.
 
I have also used 2mm 3M tape as mentioned above to insulate all 4 sides of the frame.
I have also used 2mm 3M tape as mentioned above to insulate all 4 sides of the frame.
 
Frames can be silver or gold it makes no difference.
 
Thanks and Regards
 
[image|747613]

[image|749585]
[image|747613]

[image|749585]

Status:

open

Bearbeitet von: Lesya H ,

Text:

Hi All,
 
What I have come across with is that not all panels are prone to this "fantom" issue.
 
I had compared 2 digitizers from 2 different manufacturers.
 
Properly designed digitizers have visible traces only on one side of the frame and all traces are covered with transparent insulator.
 
Poorly designed digitizer has traces on all 4 sides of the frame and no insulator. Hence need for an additional insulator to work properly.
 
I have also used 2mm 3M tape as mentioned above to insulate all 4 sides of the frame.
 
Frames can be silver or gold it makes no difference.
 
Thanks and Regards
 
[image|747613]

Status:

open

Ursprünglicher Beitrag von: Lesya H ,

Text:

Hi All,

What I have come across with is that not all panels are prone to this "fantom" issue.

I had compared 2 digitizers  from 2 different manufacturers.

Properly designed digitizers have visible traces only on one side of the frame and all traces are covered with transparent insulator.

Poorly designed digitizer has traces on all 4 sides of the frame and no insulator. Hence  need  for an additional insulator to work properly.

Frames can be silver or gold it makes no difference.

Thanks and Regards

[image|747613]

Status:

open