Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Werkzeug & Ersatzteile

Hilfe

Ursprünglicher Beitrag von: timmagness ,

Text:

Apple seems to only have a couple of different beep codes.  I seem to be getting the same 3 beep code and the single beep code.  I recently removed the logic board from my iMac (2013 slim model) to install a wall mount.  When i put everything back together it booted up without pressing the power button and immediately beeped 3 times.  So i began the lengthy process of swapping memory modules in and out of each slot, trying one at a time, so on and so forth.  Sometimes when no RAM is installed, I still get the 3 beep code.  I can't seem to figure out what else might be wrong, or if it has something to do with the iMac turning on by itself?  There are what look to be 4 LEDs on the logic board, 2 light up green when it comes on and only one when its powers off but still plugged in (not sure if that is an indication of anything or not).  At any rate, Im starting to wonder if there are two spots I can bridge together in an effort to try and clear the code or something.  I'm just a little frustrated, mainly because I dropped the %#*@ screen when I was trying to put it back together.. Thanks in advance for any help you might be able to offer

Status:

open