Zum Hauptinhalt wechseln
Hilfe

Aktuelle Version von: oldturkey03 (Bewertungsdetails) ,

Titel:

How to replace a blown resistor and added conundrums?

Text:

[image|886082]

[image|886078]

There is  a resistor or some kind of fuse soldered to the board that needs to be replaced - Has burn marks on it and will not complete a circuit when tested with an ohm meter.

Is the best option to cut it out to see if I can match it up or look for a new board?

Gerät:

Oster Digital Electric Kettle BVST-EK5967

Status:

open

Akzeptierte Antwort:

332290

Bearbeitet von: Perkins ,

Titel:

How to replace a different fusible link than the thermal fuseblown resistor and added conundrums?
How to replace a different fusible link than the thermal fuseblown resistor and added conundrums?

Text:

[image|886082][image|886078image|886082]

[image|886078
]
[image|886082][image|886078image|886082]

[image|886078
]
 
There is a resistor or some kind of fuse soldered to the board that needs to be replaced - Has burn marks on it and will not complete a circuit when tested with an ohm meter.
 
Is the best option to cut it out to see if I can match it up or look for a new board?

Gerät:

Oster Digital Electric Kettle BVST-EK5967

Status:

open

Bearbeitet von: Perkins ,

Titel:

How to replace a different fusible link than the thermal fuse?

Text:

[image|886078image|886082][image|886078]
[image|886078image|886082][image|886078]
 
There is a resistor or some kind of fuse soldered to the board that needs to be replaced - Has burn marks on it and will not complete a circuit when tested with an ohm meter.
 
Is the best option to cut it out to see if I can match it up or look for a new board?

Gerät:

Oster Digital Electric Kettle BVST-EK5967

Status:

open

Bearbeitet von: Perkins ,

Titel:

How to replace a different fusible link than the thermal fuse?

Text:

[image|886078]Thereimage|886078]

There
is a resistor or some kind of fuse soldered to the board that needs to be replaced - Has burn marks on it and will not complete a circuit when tested with an ohm meter.
[image|886078]Thereimage|886078]

There
is a resistor or some kind of fuse soldered to the board that needs to be replaced - Has burn marks on it and will not complete a circuit when tested with an ohm meter.
 
Is the best option to cut it out to see if I can match it up or look for a new board?

Gerät:

Oster Digital Electric Kettle BVST-EK5967

Status:

open

Bearbeitet von: Perkins ,

Titel:

How to replace a different fusible link than the thermal fuse?

Text:

There[image|886078]There is a resistor or some kind of fuse soldered to the board that needs to be replaced - Has burn marks on it and will not complete a circuit when tested with an ohm meter.
There[image|886078]There is a resistor or some kind of fuse soldered to the board that needs to be replaced - Has burn marks on it and will not complete a circuit when tested with an ohm meter.
 
Is the best option to cut it out to see if I can match it up or look for a new board?

Gerät:

Oster Digital Electric Kettle BVST-EK5967

Status:

open

Ursprünglicher Beitrag von: Perkins ,

Titel:

How to replace a different fusible link than the thermal fuse?

Text:

There is  a resistor or some kind of fuse soldered to the board that needs to be replaced - Has burn marks on it and will not complete a circuit when tested with an ohm meter.

Is the best option to cut it out to see if I can match it up or look for a new board?

Gerät:

Oster Digital Electric Kettle BVST-EK5967

Status:

open