Zum Hauptinhalt wechseln
Hilfe

Aktuelle Version von: oldturkey03 ,

Text:

junepembroke you are not giving us a lot of information here but I assume you are saying that you have a paper jam error. you of course verified that there is not paper truly jamed anymore. You removed the ink cartridges and checked there as well. Move the print cartridge carrier by hand a few times since it may be stuck as well. Check the paper feed tray. Use a can odof air duster and blow oputout the printer just to make sure there are no little piece of paper somewhere that create this erorerror. Next I suggest you try and do a reset.
junepembroke you are not giving us a lot of information here but I assume you are saying that you have a paper jam error. you of course verified that there is not paper truly jamed anymore. You removed the ink cartridges and checked there as well. Move the print cartridge carrier by hand a few times since it may be stuck as well. Check the paper feed tray. Use a can odof air duster and blow oputout the printer just to make sure there are no little piece of paper somewhere that create this erorerror. Next I suggest you try and do a reset.
 
1) Hold the On/Off button for 1 sec. until the printer shuts off.
 
2) Unplug the power cord and the USB cable.
 
3) Press the power button for 1 sec.
 
4) Wait 30 seconds, plug the power cord back in and then the USB cable.
 
5) Press the power button to turn it on again.
 
You can also perform a roller cleaning on the printer to see if this will resolve the issue. Use [https://support.usa.canon.com/kb/index?page=content&id=ART124121|these instructions] for that.

Status:

open

Ursprünglicher Beitrag von: oldturkey03 ,

Text:

junepembroke you are not giving us a lot of information here but I assume you are saying that you have a paper jam error. you of course verified that there is not paper truly jamed anymore. You removed the ink cartridges and checked there as well. Move the print cartridge carrier by hand a few times since it may be stuck as well. Check the paper feed tray. Use a can od air duster and blow oput the printer just to make sure there are no little piece that create this eror.  Next I suggest you try and do a reset.

1) Hold the On/Off button for 1 sec. until the printer shuts off.

2) Unplug the power cord and the USB cable.

3) Press the power button for 1 sec.

4) Wait 30 seconds, plug the power cord back in and then the USB cable.

5) Press the power button to turn it on again.

You can also perform a roller cleaning on the printer to see if this will resolve the issue. Use [https://support.usa.canon.com/kb/index?page=content&id=ART124121|these instructions] for that.

Status:

open