Zum Hauptinhalt wechseln
Hilfe

Aktuelle Version von: jayeff ,

Text:

Hi,
As you know water and electronics and electricity are not a good mix.
The water causes corrosion and provides circuit paths for the electricity which were not in the phone's operating design and could damage the components.
First '''do not turn on your phone''' and then you need to''' remove the battery as soon as possible '''if you can from the phone to minimize further damage.''
Then you need to dis-assemble the rest of the phone and clean all the affected parts using Isopropyl Alcohol 90%+ to remove all traces of corrosion and water. Do not use "rubbing alcohol" as in some cases this is only 70% and is not as effective. If you do check the label to verify the amount
Here is a link that in general, describes the process.
[[Electronics Water Damage]]
You will probably have to replace the battery as it is very hard to recover a battery from water damage.
As always with electronics, especially surface mounted PCBs be gentle when handling and especially when brushing away the corrosion. You do not want to remove any components from the board.
Here is a link to the Ifixit guide on how to dis-assemble your phone.
[[Topic:Xiaomi Mi 3]]
Hopefully after you have done all this the phone ''might'' possibly work correctly again and you can retrieve your pictures. Although since it happened a few months ago it may not be successful.
If this process seems too daunting, take your phone to a reputable, professional phone repair service and ask for a quote for a repair. If you decide to do this, ''do it sooner than later''.
-Also for your future reference (hopefully not) this may be a some value to you.
+Also for your future reference (hopefully not necessary) this may be a some value to you.
[[Don't Put Your Device in Rice. Here's Why...]]

Status:

open

Bearbeitet von: jayeff ,

Text:

Hi,
As you know water and electronics and electricity are not a good mix.
The water causes corrosion and provides circuit paths for the electricity which were not in the phone's operating design and could damage the components.
First '''do not turn on your phone''' and then you need to''' remove the battery as soon as possible '''if you can from the phone to minimize further damage.''
Then you need to dis-assemble the rest of the phone and clean all the affected parts using Isopropyl Alcohol 90%+ to remove all traces of corrosion and water. Do not use "rubbing alcohol" as in some cases this is only 70% and is not as effective. If you do check the label to verify the amount
Here is a link that in general, describes the process.
[[Electronics Water Damage]]
You will probably have to replace the battery as it is very hard to recover a battery from water damage.
As always with electronics, especially surface mounted PCBs be gentle when handling and especially when brushing away the corrosion. You do not want to remove any components from the board.
Here is a link to the Ifixit guide on how to dis-assemble your phone.
[[Topic:Xiaomi Mi 3]]
-Hopefully after you have done all this the phone ''might'' possibly work correctly again and you can retrieve your pictures.
+Hopefully after you have done all this the phone ''might'' possibly work correctly again and you can retrieve your pictures. Although since it happened a few months ago it may not be successful.
If this process seems too daunting, take your phone to a reputable, professional phone repair service and ask for a quote for a repair. If you decide to do this, ''do it sooner than later''.
Also for your future reference (hopefully not) this may be a some value to you.
[[Don't Put Your Device in Rice. Here's Why...]]

Status:

open

Bearbeitet von: jayeff ,

Text:

Hi,
As you know water and electronics and electricity are not a good mix.
The water causes corrosion and provides circuit paths for the electricity which were not in the phone's operating design and could damage the components.
First '''do not turn on your phone''' and then you need to''' remove the battery as soon as possible '''if you can from the phone to minimize further damage.''
Then you need to dis-assemble the rest of the phone and clean all the affected parts using Isopropyl Alcohol 90%+ to remove all traces of corrosion and water. Do not use "rubbing alcohol" as in some cases this is only 70% and is not as effective. If you do check the label to verify the amount
Here is a link that in general, describes the process.
[[Electronics Water Damage]]
You will probably have to replace the battery as it is very hard to recover a battery from water damage.
As always with electronics, especially surface mounted PCBs be gentle when handling and especially when brushing away the corrosion. You do not want to remove any components from the board.
Here is a link to the Ifixit guide on how to dis-assemble your phone.
[[Topic:Xiaomi Mi 3]]
Hopefully after you have done all this the phone ''might'' possibly work correctly again and you can retrieve your pictures.
If this process seems too daunting, take your phone to a reputable, professional phone repair service and ask for a quote for a repair. If you decide to do this, ''do it sooner than later''.
-Also for future your reference (hopefully not) this may be a some value to you.
-[https://www.ifixit.com/Wiki/Don%27t_Put_Your_Device_in_Rice._Here%27s_Why...]
+Also for your future reference (hopefully not) this may be a some value to you.
+
+[[Don't Put Your Device in Rice. Here's Why...]]

Status:

open

Bearbeitet von: jayeff ,

Text:

Hi,
As you know water and electronics and electricity are not a good mix.
The water causes corrosion and provides circuit paths for the electricity which were not in the phone's operating design and could damage the components.
First '''do not turn on your phone''' and then you need to''' remove the battery as soon as possible '''if you can from the phone to minimize further damage.''
Then you need to dis-assemble the rest of the phone and clean all the affected parts using Isopropyl Alcohol 90%+ to remove all traces of corrosion and water. Do not use "rubbing alcohol" as in some cases this is only 70% and is not as effective. If you do check the label to verify the amount
Here is a link that in general, describes the process.
[[Electronics Water Damage]]
You will probably have to replace the battery as it is very hard to recover a battery from water damage.
As always with electronics, especially surface mounted PCBs be gentle when handling and especially when brushing away the corrosion. You do not want to remove any components from the board.
Here is a link to the Ifixit guide on how to dis-assemble your phone.
[[Topic:Xiaomi Mi 3]]
Hopefully after you have done all this the phone ''might'' possibly work correctly again and you can retrieve your pictures.
If this process seems too daunting, take your phone to a reputable, professional phone repair service and ask for a quote for a repair. If you decide to do this, ''do it sooner than later''.
+
Also for future your reference (hopefully not) this may be a some value to you.
-https://www.ifixit.com/Wiki/Don%27t_Put_Your_Device_in_Rice._Here%27s_Why...
+[https://www.ifixit.com/Wiki/Don%27t_Put_Your_Device_in_Rice._Here%27s_Why...]

Status:

open

Bearbeitet von: jayeff ,

Text:

Hi,
As you know water and electronics and electricity are not a good mix.
The water causes corrosion and provides circuit paths for the electricity which were not in the phone's operating design and could damage the components.
First '''do not turn on your phone''' and then you need to''' remove the battery as soon as possible '''if you can from the phone to minimize further damage.''
Then you need to dis-assemble the rest of the phone and clean all the affected parts using Isopropyl Alcohol 90%+ to remove all traces of corrosion and water. Do not use "rubbing alcohol" as in some cases this is only 70% and is not as effective. If you do check the label to verify the amount
Here is a link that in general, describes the process.
[[Electronics Water Damage]]
You will probably have to replace the battery as it is very hard to recover a battery from water damage.
As always with electronics, especially surface mounted PCBs be gentle when handling and especially when brushing away the corrosion. You do not want to remove any components from the board.
Here is a link to the Ifixit guide on how to dis-assemble your phone.
[[Topic:Xiaomi Mi 3]]
Hopefully after you have done all this the phone ''might'' possibly work correctly again and you can retrieve your pictures.
If this process seems too daunting, take your phone to a reputable, professional phone repair service and ask for a quote for a repair. If you decide to do this, ''do it sooner than later''.
+Also for future your reference (hopefully not) this may be a some value to you.
+https://www.ifixit.com/Wiki/Don%27t_Put_Your_Device_in_Rice._Here%27s_Why...

Status:

open

Ursprünglicher Beitrag von: jayeff ,

Text:

Hi,

As you know water and electronics and electricity are not a good mix.

The water causes corrosion and provides circuit paths for the electricity which were not in the phone's operating design and could damage the components.

First '''do not turn on your phone''' and then you need to''' remove the battery as soon as possible '''if you can from the phone to minimize further damage.''

Then you need to dis-assemble the rest of the phone and clean all the affected parts using Isopropyl Alcohol 90%+ to remove all traces of corrosion and water. Do not use "rubbing alcohol" as in some cases this is only 70% and is not as effective. If you do check the label to verify the amount

Here is a link that in general, describes the process.

[[Electronics Water Damage]]

You will probably have to replace the battery as it is very hard to recover a battery from water damage.

As always with electronics, especially surface mounted PCBs be gentle when handling and especially when brushing away the corrosion. You do not want to remove any components from the board.

Here is a link to the Ifixit guide on how to dis-assemble your phone.

[[Topic:Xiaomi Mi 3]]

Hopefully after you have done all this the phone ''might'' possibly work correctly again and you can retrieve your pictures.

If this process seems too daunting, take your phone to a reputable, professional phone repair service and ask for a quote for a repair. If you decide to do this, ''do it sooner than later''.

Status:

open