Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Store

Hilfe

Aktuelle Version von: Irepoder ,

Text:

I use a nylon pan scraper. You can find one at Sur La Table, cost less than a dollar. Make sure to get one with a sharp edge. It slips into the gap between the metal and plastic pretty easily, and since it is an two inches wide, it will release a couple of the catches at a time. Also, it won't bend the metal. Works every time.
I use a nylon pan scraper. You can find one at Sur La Table, cost less than a dollar. Make sure to get one with a sharp edge. It slips into the gap between the metal and plastic pretty easily, and since it is an two inches wide, it will release a couple of the catches at a time. Also, it won't bend the metal. Works every time.

Status:

open

Ursprünglicher Beitrag von: Irepoder ,

Text:

I use a nylon pan scraper. You can find one at Sur La Table, cost less than a dollar. Make sure to get one with a sharp edge. It slips into the gap between the metal and plastic pretty easily, and since it is an two inches wide, it will release a couple of the catches at a time. Also, it won't bend the metal. Works every time.

Status:

open