Zum Hauptinhalt wechseln
Hilfe

Ursprünglicher Beitrag von: Conor Bailey ,

Text:

Use a tiny bit of WD40 or similar and let it soak in, and then with a reasonable amount of pressure try turning the screw, only aim to turn it a little at a time, if it keeps "camming out" you might be using an unsuitable driver. Using one of the other screws you already have try and find a driver that as closely fits it as possible.

If in the end you do strip the head, you can always drill it out, not ideal, but it does get the job done.

Status:

open