@turtlj ,Turtl Johnson, From the disassembly link below, these are the screw types mentioned.
17 screws from the board using a T3 bit on your screw driver. Or, use a T4 bit if the screw is slightly stripped.
4 silver screws on the top and bottom are 4.0mm Phillips #00, and the 13 black screws around the sides are 3.0mm Phillips #00.
Using a T3 bit on your screw driver, remove the two 4.0mm Phillips #00 screws from the metal bracket.
Good luck. I hope this helped you out, if so let me know by pressing the helpful button.
[guide|73545]