Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Werkzeug & Ersatzteile

Hilfe

Aktuelle Version von: Dan ,

Titel:

Fan running at full speed, CPU throtled

Text:

This seems to be a fairly common issue but with various causes and I can't seem to find the cause on my laptop. I

I
understand that the fan running at full speed and CPU throttling often point to a faulty temperature sensor. I'm

I'm
using the program TG Pro to check sensors, and it's telling me that the HD sensor may not be working correctly. II replaced the SATA cable (where I believe the sensor is located) but no luck. I'veI've tried a different hard drive, a solid state drive, with no luck. I

I
got fed up and went ahead and replaced the logic board, figuring this would surely solve the issue. StillStill I'm getting the full blast fan and throttled CPU. Any

Any
ideas? What else could it be? Is there a HD temp sensor that is located somewhere other than the SATA cable, logic board, or HD itself?
This seems to be a fairly common issue but with various causes and I can't seem to find the cause on my laptop. I

I
understand that the fan running at full speed and CPU throttling often point to a faulty temperature sensor. I'm

I'm
using the program TG Pro to check sensors, and it's telling me that the HD sensor may not be working correctly. II replaced the SATA cable (where I believe the sensor is located) but no luck. I'veI've tried a different hard drive, a solid state drive, with no luck. I

I
got fed up and went ahead and replaced the logic board, figuring this would surely solve the issue. StillStill I'm getting the full blast fan and throttled CPU. Any

Any
ideas? What else could it be? Is there a HD temp sensor that is located somewhere other than the SATA cable, logic board, or HD itself?
 
I will note that when I boot into safe mode, the fan still runs at full speed but the CPU throttling goes away.

Gerät:

MacBook Pro 13" Unibody Early 2011

Status:

open

Akzeptierte Antwort:

425007

Bearbeitet von: George A., Aiden Baker, and oldturkey03 (Bewertungsdetails) ,

Titel:

Fan running at full speed, CPU throtled

Text:

This seems to be a fairly common issue but with various causes and I can't seem to find the cause on my laptop.  I understand that the fan running at full speed and CPU throttling often point to a faulty temperature sensor.  I'm using the program TG Pro to check sensors, and it's telling me that the HD sensor may not be working correctly.   I replaced the SATA cable (where I believe the sensor is located) but no luck.  I've tried a different hard drive, a solid state drive, with no luck.  I got fed up and went ahead and replaced the logic board, figuring this would surely solve the issue.  Still I'm getting the full blast fan and throttled CPU.  Any ideas?  What else could it be?  Is there a HD temp sensor that is located somewhere other than the SATA cable, logic board, or HD itself?

I will note that when I boot into safe mode, the fan still runs at full speed but the CPU throttling goes away.

Gerät:

MacBook Pro 13" Unibody Early 2011

Status:

open

Akzeptierte Antwort:

425007

Bearbeitet von: Greg Abate ,

Titel:

Fan running at full speed, CPU throtled

Text:

This seems to be a fairly common issue but with various causes and I can't seem to find the cause on my laptop. I understand that the fan running at full speed and CPU throttling often point to a faulty temperature sensor. I'm using the program TG Pro to check sensors, and it's telling me that the HD sensor may not be working correctly. I replaced the SATA cable (where I believe the sensor is located) but no luck. I've tried a different hard drive, a solid state drive, with no luck. I got fed up and went ahead and replaced the logic board, figuring this would surely solve the issue. Still I'm getting the full blast fan and throttled CPU. Any ideas? What else could it be? Is there a HD temp sensor that is located somewhere other than the SATA cable, logic board, or HD itself?
This seems to be a fairly common issue but with various causes and I can't seem to find the cause on my laptop. I understand that the fan running at full speed and CPU throttling often point to a faulty temperature sensor. I'm using the program TG Pro to check sensors, and it's telling me that the HD sensor may not be working correctly. I replaced the SATA cable (where I believe the sensor is located) but no luck. I've tried a different hard drive, a solid state drive, with no luck. I got fed up and went ahead and replaced the logic board, figuring this would surely solve the issue. Still I'm getting the full blast fan and throttled CPU. Any ideas? What else could it be? Is there a HD temp sensor that is located somewhere other than the SATA cable, logic board, or HD itself?
 
I will note that when I boot into safe mode, the fan still runs at full speed but the CPU throttling goes away.

Gerät:

MacBook Pro 13" Unibody Early 2011

Status:

open

Ursprünglicher Beitrag von: Greg Abate ,

Titel:

Fan running at full speed, CPU throtled

Text:

This seems to be a fairly common issue but with various causes and I can't seem to find the cause on my laptop.  I understand that the fan running at full speed and CPU throttling often point to a faulty temperature sensor.  I'm using the program TG Pro to check sensors, and it's telling me that the HD sensor may not be working correctly.   I replaced the SATA cable (where I believe the sensor is located) but no luck.  I've tried a different hard drive, a solid state drive, with no luck.  I got fed up and went ahead and replaced the logic board, figuring this would surely solve the issue.  Still I'm getting the full blast fan and throttled CPU.  Any ideas?  What else could it be?

I will note that when I boot into safe mode, the fan still runs at full speed but the CPU throttling goes away.

Gerät:

MacBook Pro 13" Unibody Early 2011

Status:

open