Aktuelle Version von: TwixOps ,
Text:
| Hello, I just saw your comment. Hereis the pinout of the wires going toward the headset from the sound board |
| Hello, I just saw your comment. Hereis the pinout of the wires going toward the headset from the sound board |
| [image|1201906] |
| Here are the wires attached down the left side of the PCB (when looking at the bottom). From the edge of the PCB inward they are: |
| Solid copper, going to F_B |
| red/green spiral, F_L |
| Solid Green going to S_R |
| Red/copper spiral going to S_L |
| Solid red going to R_R |
| blue/green spiral. going to R_L |
| Above that a large black cable carries a white wire to M+ and a copper to M- |
| [image|1201905] |
| Here are the wires attached at the bottom of the PCB. From the corner of the PCB outward they are: |
| two blue/copper cables going to GND2 |
| Red/Blue spiral going to Cen_L |
| Solid Blue going to Cen_R |
| Solid Black going to Sub_R |
| Solid Black going to Sub_L |
| Two Green/Copper cables going to 5V |
| Two Blue/copper spiral going to - |
| If you need the pinout for the other side of the board (towards the computer,) just ask. |
Status:
open
Ursprünglicher Beitrag von: TwixOps ,
Text:
Hello, I just saw your comment. Hereis the pinout of the wires going toward the headset from the sound [image|1201906] Here are the wires attached down the left side of the PCB (when looking at the bottom). From the edge of the PCB inward they are: Solid copper, going to F_B red/green spiral, F_L Solid Green going to S_R Red/copper spiral going to S_L Solid red going to R_R blue/green spiral. going to R_L Above that a large black cable carries a white wire to M+ and a copper to M- [image|1201905] Here are the wires attached at the bottom of the PCB. From the corner of the PCB outward they are: two blue/copper cables going to GND2 Red/Blue spiral going to Cen_L Solid Blue going to Cen_R Solid Black going to Sub_R Solid Black going to Sub_L Two Green/Copper cables going to 5V Two Blue/copper spiral going to - If you need the pinout for the other side of the board (towards the computer,) just ask.
Status:
open