Zum Hauptinhalt wechseln
Hilfe

Aktuelle Version von: oldturkey03 (Bewertungsdetails) ,

Titel:

Fan rev max speed when using only one CPU. Is this intended?

Text:

Hello.

I use Mac Pro 2011 (12?) with dual x5670 CPUs.

When I try to boot with one CPU removed, it gets fans rev max speed and makes hugh noise.

These are my attempt :

2 CPUs - normal

1 CPU on socket B - no boot (blink white led)

1 CPU on socket A - boot, but fans rev max speed.

1 CPU A with 1 cooler - max rev

1 CPU A with 2 coolers - max rev

I know swap with the different firmware CPU tray makes max fan, but thats begin immediate booting. In this case, it start with normal quiet, but getting super fast after a minute or two. Either Mac OS and Windows.

Also I found not important much but wierd symptom, CPU temp is very normal, but TDP is always max(checked HWMonitor on Windows).

Is this intended behavior? Like alarm for broken or not recognise one CPU or stealing one?

Gerät:

Mac Pro 2009-2012

Status:

open

Akzeptierte Antwort:

+442485

Ursprünglicher Beitrag von: Anonymous ,

Titel:

Fan rev max speed when using only one CPU. Is this intended?

Text:

Hello.

I use Mac Pro 2011 (12?) with dual x5670 CPUs.

When I try to boot with one CPU removed, it gets fans rev max speed and makes hugh noise.

These are my attempt :

2 CPUs - normal

1 CPU on socket B - no boot (blink white led)

1 CPU on socket A - boot, but fans rev max speed.

1 CPU A with 1 cooler - max rev

1 CPU A with 2 coolers - max rev

I know swap with the different firmware CPU tray makes max fan, but thats begin immediate booting. In this case, it start with normal quiet, but getting super fast after a minute or two. Either Mac OS and Windows.

Also I found not important much but wierd symptom, CPU temp is very normal, but TDP is always max(checked HWMonitor on Windows).

Is this intended behavior? Like alarm for broken or not recognise one CPU or stealing one?

Gerät:

Mac Pro 2009-2012

Status:

open