Washer won't agitate, fills with water & will spin, but hums elsewhere
Original-Beitrag von::
EDIT: It seems like it's problem is going from rinse to spin. Ran it through a small cycle and stops right after rinse. It makes that hum, then shuts off. There is a burnt smell, but not that bad. Ironically, going from cycle to spin works fine.
My working theory is the transmission, as it does make a bit of a rattling noise at agitation. Video: [https://youtu.be/POABtLbIPts] and when going into the second spin, it seems like everything locks up.
Video of the machine locking up: [https://youtu.be/QzH00JX6Kxc]
Spin works fine, but anything else just hums. Finding a bunch of answers & good places to start, but something's still not connecting.
First thought was something is locking the drive and tripping the motor. BUT, I take the belt off and the motor will not engage except on spin.
This is actually an Amana, but couldn't find a suitable appliance.
Thoughts anyone?
This was the closest & best read I've found, but has a lot of options.
[post|154421]
Washer won't agitate, fills with water & will spin, but hums elsewhere
Original-Beitrag von::
+
EDIT: It seems like it's problem is going from rinse to spin. Ran it through a small cycle and stops right after rinse. It makes that hum, then shuts off. There is a burnt smell, but not that bad. Ironically, going from cycle to spin works fine.
+
+
My working theory is the transmission, as it does make a bit of a rattling noise at agitation. Video: [https://youtu.be/POABtLbIPts] and when going into the second spin, it seems like everything locks up.
+
+
Video of the machine locking up: [https://youtu.be/QzH00JX6Kxc]
+
Spin works fine, but anything else just hums. Finding a bunch of answers & good places to start, but something's still not connecting.
First thought was something is locking the drive and tripping the motor. BUT, I take the belt off and the motor will not engage except on spin.
This is actually an Amana, but couldn't find a suitable appliance.
Thoughts anyone?
This was the closest & best read I've found, but has a lot of options.
Washer won't agitate, fills with water & will spin, but hums elsewhere
Original-Beitrag von::
Spin works fine, but anything else just hums. Finding a bunch of answers & good places to start, but something's still not connecting.
First thought was something is locking the drive and tripping the motor. BUT, I take the belt off and the motor will not engage except on spin.
This is actually an Amana, but couldn't find a suitable appliance.
Thoughts anyone?
This was the closest & best read I've found, but has a lot of options.
[post|154421]