Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Werkzeug & Ersatzteile

Hilfe

Aktuelle Version von: oldturkey03 ,

Text:

'''J.R. Asprelli'''  that is reference designator L9100 which is a 250ohm ferrite bead. You can get the package size by measuring the distance from one point to the other.
 
[image|1324203]
 
YouYes, you will need this to check why it blew the way it didget your display to work. There should only be 12 Volt on that rail, so make sure you have no short anywhere else.
YouYes, you will need this to check why it blew the way it didget your display to work. There should only be 12 Volt on that rail, so make sure you have no short anywhere else.
 
[image|1324201]

Status:

open

Ursprünglicher Beitrag von: oldturkey03 ,

Text:

'''J.R. Asprelli'''   that is reference designator L9100 which is a 250ohm ferrite bead. You can get the package size by measuring the distance from one point to the other.

[image|1324203]

You will need to check why it blew the way it did. There should only be 12 Volt on that rail, so make sure you have no short anywhere else.

[image|1324201]

Status:

open