Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur

Werkzeug & Ersatzteile

Hilfe

Aktuelle Version von: Ron Davis ,

Text:

This is NOT a software issue! The aftermarket screens allow too much light into the proximity sensor.
 
== The Fix: ==
 
Black electrical tape. Cut two small holes with an Exacto knife (about the size of a ballpoint pen) exactly large enough to fit over the two sensors. Cut out the holes so that you have a small rectangle with two holes. Place the rectangle over the proximity sensors and the holes should line up.
 
ThatsThat's it! Reconnect the "Faultyfaulty" screen and... VOILAand...VOILA!
ThatsThat's it! Reconnect the "Faultyfaulty" screen and... VOILAand...VOILA!

Status:

open

Bearbeitet von: Ron Davis ,

Text:

This is NOT a software issue! The aftermarket screens allow too much light into the proximity sensor.
 
**THE FIX**== The Fix: ==
**THE FIX**== The Fix: ==
 
Black electrical tape. Cut two small holes with an Exacto knife (about the size of a ballpoint pen) exactly large enough to fit over the two sensors. Cut out the holes so that you have a small rectangle with two holes. Place the rectangle over the proximity sensors and the holes should line up.
 
Thats it! Reconnect the "Faulty" screen and... VOILA!

Status:

open

Bearbeitet von: Ron Davis ,

Text:

This is NOT a software issue! The aftermarket screens allow too much light into the proximity sensor.
 
**THE FIX**
 
Black electrical tape, cuttape. Cut two small holes with an exactoExacto knife (about the size of a ballpoint pen) exactly large enough to fit over the two sensors. Cut out the holes so that you now have a small rectangle with two holes. Place the rectangle over the proximity sensors and the holes should line up.
Black electrical tape, cuttape. Cut two small holes with an exactoExacto knife (about the size of a ballpoint pen) exactly large enough to fit over the two sensors. Cut out the holes so that you now have a small rectangle with two holes. Place the rectangle over the proximity sensors and the holes should line up.
 
Place the rectangle over the proximity sensors and the holes should line up.

Thats
Thats it!

Reconnect
Reconnect the "Faulty" screen and... VOILA!
Place the rectangle over the proximity sensors and the holes should line up.

Thats
Thats it!

Reconnect
Reconnect the "Faulty" screen and... VOILA!

Status:

open

Ursprünglicher Beitrag von: Simon ,

Text:

This is NOT a software issue! The aftermarket screens allow too much light into the proximity sensor.

**THE FIX**

Black electrical tape, cut two small holes with an exacto knife (about the size of a ballpoint pen) exactly large enough to fit over the two sensors. Cut out the holes so you now have a small rectangle with two holes.

Place the rectangle over the proximity sensors and the holes should line up.

Thats it!

Reconnect the "Faulty" screen and... VOILA!

Status:

open