Zum Hauptinhalt wechseln

Repariere deine Sachen

Recht auf Reparatur



Ursprünglicher Beitrag von: Kyle Webb ,


'''Your screen is blank after you return to Home'''

1.     Turn off your console by holding the '''Xbox''' button  on the front of the console for approximately 10 seconds.

2.     Turn your console back on by pressing the '''Xbox''' button  on the console or the '''Xbox''' button  on your Xbox One wireless controller.


'''Your screen is blank after you begin watching a Blu-ray Disc'''

'''Note''' The Blu-ray Player app does not apply to the Xbox One S All-Digital Edition.

This can happen if '''Video output''' in your console settings is set to '''Allow 24Hz'''. To turn off '''Allow 24Hz''', follow these steps:

1.     On your wireless controller, press the '''Xbox''' button  to open the guide.

2.     Select '''System''' > '''Settings''' > '''Display & sound'''.

3.     Select '''Video output''' > '''Video modes'''.

4.     Click '''Allow 24Hz''' to turn off this setting.


'''Your screen is blank after you turn on the console'''

* Confirm that both your TV      and Xbox One console are turned on.
* Check that your TV is set to      the correct input signal (HDMI).
* Check that the HDMI cable      connection to your console is secure.
* Check that the HDMI cable      connection to your TV is secure.
* Check that the HDMI cable is      connected to the "out to TV" port on the console.
* Power cycle your Xbox One:      Press and hold the '''Xbox''' button for 10 seconds to      turn off the console, and then turn it on again.
* Reset your display settings.      Here's how:

1.     If there's a disc in the Xbox One console, eject it.

2.     On the console, press and hold the '''Xbox''' button for 10 seconds to turn off the console.

3.     Press and hold the '''Xbox''' button and the '''Eject''' button until you hear a beep to turn on the console. You’ll hear one beep right away and a second beep 10 seconds later. The power light will flash on before the second beep. DO NOT LET GO until the second beep occurs.

'''Note''' If you have an Xbox One S All-Digital Edition, you’ll need to press and hold the '''Xbox''' button and the '''Bind''' button instead, as your console does not have an '''Eject''' button.

In either case, this will boot your console in low resolution mode (640 × 480). To reset this setting, press the '''Xbox''' button to open the guide. Go to '''System''' > '''Settings''' > '''Display & sound''' > '''Video output''', and then select the resolution you want from the Display dropdown.

4.     If you’re required to complete these steps on every boot-up, you’ll want to change your TV connection to HDMI as shown in step 3 of the next section, "Your screen is blank and you use an AVR in your setup." For more info, see How to adjust the display settings on your Xbox One.

* Try plugging the HDMI cable      into a different HDMI port on your TV.
* Try using a different HDMI      cable to connect your console to your TV.
* Try connecting your console      to a different TV.


'''Your screen is blank and you use an AVR in your setup'''

If your Xbox One console is connected to an audio-video receiver (AVR) that's connected to your TV and you have no sound, follow these troubleshooting steps:

1.     Turn on your devices in the following order, waiting for each device to fully power up before starting the next device:

a.      Turn on your TV first.

b.     Once your TV is displaying a picture, turn on the AVR.

c.      Turn on your Xbox One console.

2.     Use the Input button on your TV’s remote control (or the buttons on the TV) to switch the input source of your AVR away from the console and then back (for example, HDMI1 to HDMI2, and then back to HDMI1).

3.     Restart the AVR.

4.     Set your TV connection to '''HDMI''':

a.      Press the '''Xbox''' button to open the guide.

b.     Select '''System''' > '''Settings''' > '''Display & sound'''.

c.      Select '''Video output''' > '''Video fidelity & overscan'''.

d.     Under the Display dropdown, select the '''HDMI''' option.


'''Your screen is blank after you install a system update'''

If you've just installed a system update and you see a blank screen, try the Xbox One System Update Solution. In step 1, select '''I NEED TO TROUBLESHOOT A SYSTEM UPDATE ERROR''', and then follow the steps shown.