Zum Hauptinhalt wechseln
Hilfe

Aktuelle Version von: Joshua Freeman ,

Titel:

Kenmore 10658902802 side-by-side HELP identifying and locating a part

Text:

[image|1793567][image|1793565][image|1793566]SoSo I was looking to see why the door latch was not closing tightly over the ice chute of my ice dispenser on the front of my freezer door. Once inside I saw that the pin had popped out of place that had the spring on it to close the hatch properly. When I went to pop the pin back in, the force of the spring on the pin pushed against the plastic hook-shaped molded piece and broke it. I don’t think any amount of glue is going to hold this piece into place, so the only other solution (besides not using it) would be to replace Part #1 in the diagram shown in the picture. However, I have not been able to find a part number or anyone selling this piece. Any help would be appreciated. Thanks!
[image|1793567][image|1793565][image|1793566]SoSo I was looking to see why the door latch was not closing tightly over the ice chute of my ice dispenser on the front of my freezer door. Once inside I saw that the pin had popped out of place that had the spring on it to close the hatch properly. When I went to pop the pin back in, the force of the spring on the pin pushed against the plastic hook-shaped molded piece and broke it. I don’t think any amount of glue is going to hold this piece into place, so the only other solution (besides not using it) would be to replace Part #1 in the diagram shown in the picture. However, I have not been able to find a part number or anyone selling this piece. Any help would be appreciated. Thanks!
 
[image|1792514]

Gerät:

Refrigerator

Status:

open

Akzeptierte Antwort:

574855

Bearbeitet von: Joshua Freeman ,

Titel:

Kenmore 10658902802 side-by-side HELP identifying and locating a part

Text:

So[image|1793567][image|1793565][image|1793566]So I was looking to see why the door latch was not closing tightly over the ice chute of my ice dispenser on the front of my freezer door. Once inside I saw that the pin had popped out of place that had the spring on it to close the hatch properly. When I went to pop the pin back in, the force of the spring on the pin pushed against the plastic hook-shaped molded piece and broke it. I don’t think any amount of glue is going to hold this piece into place, so the only other solution (besides not using it) would be to replace Part #1 in the diagram shown in the picture. However, I have not been able to find a part number or anyone selling this piece. Any help would be appreciated. Thanks!
So[image|1793567][image|1793565][image|1793566]So I was looking to see why the door latch was not closing tightly over the ice chute of my ice dispenser on the front of my freezer door. Once inside I saw that the pin had popped out of place that had the spring on it to close the hatch properly. When I went to pop the pin back in, the force of the spring on the pin pushed against the plastic hook-shaped molded piece and broke it. I don’t think any amount of glue is going to hold this piece into place, so the only other solution (besides not using it) would be to replace Part #1 in the diagram shown in the picture. However, I have not been able to find a part number or anyone selling this piece. Any help would be appreciated. Thanks!
 
[image|1792514]

Gerät:

Refrigerator

Status:

open

Akzeptierte Antwort:

574855

Bearbeitet von: Joshua Freeman ,

Titel:

Kenmore 10658902802 side-by-side HELP identifying and locating a part

Text:

So I was looking to see why the door latch was not closing tightly over the ice chute of my ice dispenser on the front of my freezer door. Once inside I saw that the pin had popped out of place that had the spring on it to close the hatch properly. When I went to pop the pin back in, the force of the spring on the pin pushed against the plastic hook-shaped molded piece and broke it. I don’t think any amount of glue is going to hold this piece into place, so the only other solution (besides not using it) would be to replace Part #1 in the diagram shown in the picture. However, I have not been able to find a part number or anyone selling this piece. Any help would be appreciated. Thanks!

[image|1792514]

Gerät:

Refrigerator

Status:

open

Akzeptierte Antwort:

574855

Ursprünglicher Beitrag von: Joshua Freeman ,

Titel:

Kenmore 10658902802 side-by-side HELP identifying and locating a part

Text:

So I was looking to see why the door latch was not closing tightly over the ice chute of my ice dispenser on the front of my freezer door. Once inside I saw that the pin had popped out of place that had the spring on it to close the hatch properly. When I went to pop the pin back in, the force of the spring on the pin pushed against the plastic hook-shaped molded piece and broke it. I don’t think any amount of glue is going to hold this piece into place, so the only other solution (besides not using it) would be to replace Part #1 in the diagram shown in the picture. However, I have not been able to find a part number or anyone selling this piece. Any help would be appreciated. Thanks!

[image|1792514]

Gerät:

Refrigerator

Status:

open