Aktuelle Version von:
mike
Original-Beitrag von::
| | Hi Bryn, |
|---|
| | |
|---|
| | Have you tried connecting it to an external monitor or TV? |
|---|
| | |
|---|
| | If that works then loose cable to screen or defective screen. |
|---|
| | |
|---|
| | That model is from 2011. Remove the CMOS again but this time replace it as it is probably not holding it charge. |
|---|
| | |
|---|
| - | When you do get it going agian, this time, update the BIOS. Should be v1.80. |
|---|
| + | When you do get it going agian, this time, update the BIOS. Should be v6.20. |
|---|
| + | |
|---|
| + | https://support.dynabook.com/support/viewContentDetail?contentId=3569999 |
|---|
| + | |
|---|
| + | It can be updated from Windows or use Rufus v3.11 to make a bootable USB flash drive from the “iso” file. |
|---|
| | |
|---|
| | Hope this helps! |
|---|
Status:
open
Bearbeitet von:
mike
Original-Beitrag von::
| | Hi Bryn, |
|---|
| | |
|---|
| | Have you tried connecting it to an external monitor or TV? |
|---|
| | |
|---|
| | If that works then loose cable to screen or defective screen. |
|---|
| + | |
|---|
| + | That model is from 2011. Remove the CMOS again but this time replace it as it is probably not holding it charge. |
|---|
| + | |
|---|
| + | When you do get it going agian, this time, update the BIOS. Should be v1.80. |
|---|
| + | |
|---|
| + | Hope this helps! |
|---|
Status:
open
Original-Beitrag von:
mike
Original-Beitrag von::
Hi Bryn,
Have you tried connecting it to an external monitor or TV?
If that works then loose cable to screen or defective screen.
Status:
open