Zum Hauptinhalt wechseln
Hilfe

Aktuelle Version von: mike ,

Text:

In the photo, it looks like you have used '''too''' much thermal paste.
-The purpose of the paste is to just increase the contact area by filling microscopic pits on the surface of the CPU and the heat sink.
+The purpose of the paste is to just increase the contact area by filling in microscopic pits on the surface of the CPU and the heat sink.
You just want a thin layer of paste. If you use too much the CPU and heat sink will not be in proper contact with each other. That would explain your over heating.

Status:

open

Ursprünglicher Beitrag von: mike ,

Text:

In the photo, it looks like you have used '''too''' much thermal paste.

The purpose of the paste is to just increase the contact area by filling microscopic pits on the surface of the CPU and the heat sink.

You just want a thin layer of paste.  If you use too much the CPU and heat sink will not be in proper contact with each other. That would explain your over heating.

Status:

open