Zum Hauptinhalt wechseln
Hilfe

Aktuelle Version von: Dan ,

Text:

Sadly, you do have a flex cable issue. There are four cables from the lid which connect up with the T-CON board
[image|2369462]
-So when your system fell the hinge area (black cover) was hit which pressed against these cables. From your description your backlight cable and one of the display cables got damaged.
-
-Sorry to say you’ll need a new display assembly! Here’s the guide to replace it [guide|113612] and here’s the needed part [product|IF123-066-3]
+So when your system fell the hinge area (black cover) was hit which pressed against these cables. From your description your backlight cable and one of the display cables got damaged and as you used your system things got worse. There is no options to fix this other than replacing the full lid assembly. Here’s the guide to replace it [guide|113612] and here’s the needed part [product|IF123-066-3]

Status:

open

Ursprünglicher Beitrag von: Dan ,

Text:

Sadly, you do have a flex cable issue. There are four cables from the lid which connect up with the T-CON board

[image|2369462]

So when your system fell the hinge area (black cover) was hit which pressed against these cables. From your description your backlight cable and one of the display cables got damaged.

Sorry to say you’ll need a new display assembly! Here’s the guide to replace it [guide|113612] and here’s the needed part [product|IF123-066-3]

Status:

open